S6 Rotor housings W/ S5 Irons
05-14-2006, 01:36 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2005
Location: Oregon
Posts: 407
Yeah, I bought a JDM 13B-t S5 and both rotor housings are eat to ****. I found a good deal on some series 6 housings with cermet coating on them, and I was just woundering if they would work for my engine???? 
Thanks
Thanks
05-17-2006, 12:49 AM
#8
Senior Member
Join Date: Oct 2003
Location: Canada
Posts: 3,502
Exhaust Gas Recycle circuit, be it not actually exhaust fumes or fresh air from the pump, whatever. All that annoying crap everybody ends up ditching, watch out for it. And be certain!
Nothing sucks more than putting something together and forgetting about emissions circuits.
Nothing sucks more than putting something together and forgetting about emissions circuits.
05-17-2006, 10:22 AM
#9
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by ColinRX7' post='819657' date='May 16 2006, 10:49 PM
Exhaust Gas Recycle circuit, be it not actually exhaust fumes or fresh air from the pump, whatever. All that annoying crap everybody ends up ditching, watch out for it. And be certain!
Nothing sucks more than putting something together and forgetting about emissions circuits.
yeah in california the shoe is on the other foot, a suprising number of builders put the motors together with the rotor housings swapped front to rear, which blocks off the air pump passages, and then the car doesnt pass smog, ever
05-18-2006, 09:16 PM
#10
Senior Member
Join Date: Aug 2004
Posts: 426
it's pretty hard to miss the big "F" and "R" stamps on the housings. and if they didn't have them, the builder should mark them or at least remember them...makes me wonder what other things get overlooked in that kind of build...yikes!