S4 6pt motor build large Sp and some more build tips
Member
Joined: Mar 2007
Posts: 68
From: Newberg, OR
Originally Posted by iceblue' post='870393' date='May 4 2007, 08:56 AM
There is no need to be a dick and I found your post quite insulting!
Maybe your seals were perfect but mine were not in spec!
Easy fellas! Back on track!
Senior Member
Joined: Jun 2003
Posts: 917
From: Grand Prairie, TX
Originally Posted by Stanello' post='870924' date='May 7 2007, 05:34 PM
You mixed S4 and S5 rotor housings. The trailing spark plug holes are in a different location.
It won't cause a problem. I did it on one of my motors 8 years ago. Never an issue, fortunately.
B
Senior Member
Joined: Jun 2003
Posts: 917
From: Grand Prairie, TX
Originally Posted by WNT2CREALPAIN' post='870799' date='May 6 2007, 11:33 PM
why?
https://www.nopistons.com/forums/ind...howtopic=67208
B
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 381
From: Freeport FL
It would not make a bit of difference if they were s5 and S4 and off. It would only matter if more then one chamber fired at the same time. Since the chambers fire 50% corolation it is irrelevant. If they were drastic on a big turbo motor it would need to be tuned out or avoided all together.
