well those rotors have seen 100k street miles, and 2 seasons of racing, plus they have been overheated, and the sleeve came out and hit it, so they were remilled for 2mm seals. then we did some testing with the haltech so they saw some 10k+ dyno runs, but they actually failed on the stock s5 ecu, at 8500.



they are s5 rotors.



the parts replaced were the, rear rotor, e shaft, both stationary gears, center and rear plate, and all the seals on the rear of the rear rotor (melted in!), we had 3 events on the engine https://www.nopistons.com/forums/pub...IR#>/angry.png

Yep, been there, done that...



http://rx7cz.net/photos/workshop33/IMG_1993.JPG



Engine from where the front housing came from...

http://rx7cz.net/photos/works12/IMG_0009.JPG







-Ted

nice and totaled

RETed - It looks like your engine bleed on the table. Poor thing.

I can't believe they sheared the e-shaft on an NA!

Yeow!





-Ted

by old I meant high milage and or lots of racing

both https://www.nopistons.com/forums/pub...#>/biggrin.png

yeah