Port Matching.

Reply Subscribe

Thread Tools

Search this Thread

01-13-2004, 07:14 PM

#11

CypherNinja

Junior Member

Join Date: Nov 2003

Posts: 20

*cough*EGR*cough*

01-13-2004, 11:28 PM

#12

mazdaspeed7

Super Moderator

Join Date: Sep 2002

Location: Savannah, Ga

Posts: 2,763

Quote:

Originally Posted by pengaru' date='Jan 13 2004, 07:01 PM

But you indicated if you have fuel and crap going upstream you have bigger problems, I don't exactly agree with that because there are forces at play that do bring **** back up the runner that you wouldnt expect.

As far as polishing the runner goes, this can be and has been debated to no end as far as I've seen.

Those things are minor under normal circumstances. But still, my point was if those thingsare enough of an issue to pertain to polishing above the injectors, you have more serious problems than where to polish.

And while you could argue the polishing thing all you want, there is plenty of info to be found, and there is a way its been done for considerable time because it is a good compromise between the two.