Wants to show you my race engine https://www.nopistons.com/forums/pub...1047683894.gif .

Some info about this engine:

13B-REW block

Streetported

Dowell pinned

Rebalanced

MFR rotor bearing

MFR flywheel and 3 disk tilton clutch

3mm ceramic apex seals

13B-RE upper manifold with custom made lower manifold

All seals springs bearings are new.

On this pics there is a T78 turbo on it but going for a special made to fit this engine setup.

4X640cc injector in lower manifold and 2X1600 cc in el bow.

Im going to use a Swedish made ProSpark fuel and ignition system on it.

[attachment=29675:attachment]

[attachment=29676:attachment]

[attachment=29677:attachment]

very nice...

https://www.nopistons.com/forums/pub...>/bigthumb.gif

I swear that looks like a toy engine. truly awesome. congrats.

woh, someone put a lot of work into this engine, beautiful.



CW

thats extremely nice !

may i ask you who built that lim ?

[quote name='Old Splatterhand' date='Mar 30 2005, 05:37 AM']thats extremely nice !

may i ask you who built that lim ?


[/quote]I build it from some pip and bends.

That is SO hot. I almost can't wait for my motor to blow up so I can do something like that to it.

It should be put behind glass, it's a work of art.

NICE. Whats it going in?

nice manifold manard..... very simple high velocity runners and to top it off the RE upper... phat

I'm diggin that LIM man.



Good looking motor.

[quote name='rfreeman27' date='Mar 30 2005, 06:35 PM']I'm diggin that LIM man.



Good looking motor.


[/quote]



Gorgeous!!! Very nice work.



Now, take the Cosmo 13BRE TB off, send it to me, and let me port & polish it for you. https://www.nopistons.com/forums/pub...IR#>/smile.png



B

that LIM is hot and the motor in general is hot, what turbo is going on if the t78 is just holding something even nicers place?

[quote name='93 R1' date='Mar 30 2005, 12:12 PM']NICE. Whats it going in?


[/quote]I going to put it in a TII -91 that is modifyed for street and track,when the car is finished i post some pics on it.

[quote name='BDC' date='Mar 30 2005, 10:51 PM']Gorgeous!!! Very nice work.



Now, take the Cosmo 13BRE TB off, send it to me, and let me port & polish it for you. https://www.nopistons.com/forums/pub...IR#>/smile.png



B


[/quote]Thanks but i think im going to have the TB blue so it match the engine.I have a cosmo elbow that im going to polish when i have welded the injector holder on it.

[quote name='CrassFC3S' date='Mar 30 2005, 11:23 PM']that LIM is hot and the motor in general is hot, what turbo is going on if the t78 is just holding something even nicers place?


[/quote]I dont know yet but whe build one for right purpose.

Can I borrow that engine?

[quote name='Wankeltrim' date='Mar 31 2005, 01:08 AM']Thanks but i think im going to have the TB blue so it match the engine.I have a cosmo elbow that im going to polish when i have welded the injector holder on it.


[/quote]



Hi Wankeltrim,



I'm talking more on the lines of something like this:



http://home.comcast.net/~bdc196/Thro...o13BRE_TB2.jpg



B

Engine looks SO HOT!!! Want to touch the Mani!



hehehe...B, you crack me up man

curious to see the numbers! very nice attention to detail

[quote name='crpdragracing' date='Mar 31 2005, 08:23 AM']Can I borrow that engine?


[/quote]

BORROW https://www.nopistons.com/forums/pub...1047683785.gif Maby you can buy it when i got he's ugly bigbrother ready https://www.nopistons.com/forums/pub...IR#>/smile.png .



http://abiex.wankeltrim.se/mix/DSCN0413%20liten.JPG

Once again Jörgen, that motor is a beauty.



Kim

wankeltrim,

why did you choose the 2nd gen UIM over the 3rd gen?

does it flow more or something?

Damn ... Me likey . That engine does look like some thing some a model/toy , Judge . I do really like the LIM , none of that emissons **** . Is it me or does that turbo sit really high up ? Tilton clutchs are the **** ...haha... Can't wait to see it all together ...

Ok I think I will take this nude picture off the desktop and set that baby right there as my new desktop background!!!



Super hot.

[quote name='Old Splatterhand' date='Apr 1 2005, 01:47 AM']wankeltrim,

why did you choose the 2nd gen UIM over the 3rd gen?

does it flow more or something?


[/quote]



That's an RE UIM, not a second gen.

Really nice! Where are you going to mount the secondary fuel injectors?

[quote name='The Ultimate 7' date='Apr 7 2005, 12:32 AM']Really nice! Where are you going to mount the secondary fuel injectors?


[/quote]Im going to mount both primary and secondary in the lower manifold.

Where exactly? I can't see holes for the injectors..?, Do you have a pic with them installed? I'm planning to make one myself but for my 20B

[quote name='Rub20B' date='Apr 18 2005, 08:23 AM']Where exactly? I can't see holes for the injectors..?, Do you have a pic with them installed? I'm planning to make one myself but for my 20B


[/quote]They are not mounted on the manifold yet.

Where on the LIM are you planning to put them? How you made the bend at the bottom of the LIM, where it sit's against the engine..

[quote name='Wankeltrim' date='Apr 26 2005, 08:50 AM']They are not mounted on the manifold yet.


[/quote]





Is your manifold made out of SS or aluminum? I'm thinking of doing something similar for my 20b to equalize the runners since the center section flows better on that engine.

Wow. My eyes hurt now. That thing is some serious bling. Looks good.

damn that looks beautiful.....just think, when that thing blows you'll have to do it all over again https://www.nopistons.com/forums/pub...DIR#>/wink.png

If I had to choose one word to describe that engine it would have to be "SEX"

I wouldn't turn the key on it, it'd leave it

You should sell me that LIM!

any clue on the numbers it will make?

beautiful, especially that LIM

awesome engine.