|
Originally Posted by White_FC' date='Dec 12 2003, 10:53 PM
umm just quickly on your inlet manifold, you might want to think about keeping each center runner individual or joining to their respective secondary runner, instead of how you have it converging into one.
Just a thought https://www.nopistons.com/forums/pub...IR#>/smile.png the bridge looks great though. |
1 Attachment(s)
some dimensions i took on the housings , i want to join the 2 hoels on the NA it only seems appropriate for teh size port that it needs to flow. i also measured the FD for comparison.
|
1 Attachment(s)
just a quickie...
Has anyone ever tried to join the 2 primary ports together? if so how did it work out? |
Originally Posted by ArmyOfOne' date='Dec 13 2003, 05:51 PM
just a quickie...
Has anyone ever tried to join the 2 primary ports together? if so how did it work out? but it coudl still amke mroe power just from the shear volume |
little update on what i have decided to do. connected the bridge and the secondary and aux ports, also joined the port opening at the manifold side, and i am not gonna bridge the primary anymore but just do a large streetport on turbo plate.
|
1 Attachment(s)
one more
|
|
https://www.nopistons.com/forums/pub...DIR#>/ohmy.png
That's a very cool idea, but I would be very worried - the length of that bridge, looks like it might break!! |
Actually I think its supported as seen in the side port view
|
Originally Posted by ArmyOfOne' date='Dec 18 2003, 11:38 AM
Actually I think its supported as seen in the side port view
i was thinking about also leaving one under the water seal area bu ti am not sure if i need to. |
| All times are GMT -5. The time now is 03:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands