I have a 90 gxl with a blown motor, cracked rotor housings to be specific. I just got my hands on a 88 non-turbo car that has been wrecked but has a good motor. I was wondering if anyone could tell me what would be involved in putting the motor from the 88 in the 90. I know that the series 5 motor in the 90 and the series 4 motor in the 88 are different but since I have the complete car I can swap any parts needed. I was also wondering if there are any parts I should but on the 88 motor that are on the 90 motor, such as the intake. If anyone has any information on this engine swap and could help me I would greatly apreciated.



Thanks,

Noel

Heres the S5 parts you'll need to make a straight swap:



Upper and lower intakes......just easier to swap both as a unit

Fuel injectors

Front cover so you can use the stock OMP



Other wise you should be good to go.Let us know how it goes.



~Luis

thank you for the help. So I won't have to swap wiring harnesses or anything? I should be doing the swap next week I will make sure to keep you updated on it.



Noel

O your using the stock S5 intakes then it uses the stock wiring then.Makes for a easy swap.But the extra wires are nice to have if something fries up on you or you need to fix a harness. https://www.nopistons.com/forums/pub...#>/biggrin.png

That's good to hear. It will be easier not swapping wiring harnesses lol. Thank you for your help.



Noel