how difficult would it be if when i got a rebuild to keep my blown block and rebuild it with a rebuild kit..like the block isnt blown yet but it needs to be rebuilt..so how difficult would that be..and when i got it rebuilt and all the parts pout on there to drop it in an old vw beetle..just wondering

Depends on how blown it is. Sometimes you need an entire engine...everything. As for putting it in a VW, I hope you have some good fabrication skills.



Check here for some more info

well i mean the motor still runs bc its in my car still.. ithink its just a blown seal..so would it be difficult to do it myself?..and what im saying about the vw..is it possible?..and if so what kind of fabricating skilss as you say would i need?

they have an adaptor for the bellhousing so it will bolt to the stock tranny, the mounts should be pretty simple after that



mike

your block is required with all rebuilds if i am not mistaken. and if there are new parts that are used, they are not suitable for another engine anyway.......that is if i got the jist of what you were asking....you would essentiall have to have 2 good cores.....



lou

im just gonna pay the core charge..and if not that then im gonna buy a motor from him..he has plenty here at the loacal rx-7 shop..so your saying i would be better off buying all new parts to go on the block..like new manifolds and all that good stuff?..so in other words it would go in the beetel somewhat easily..just that bellhousing then it bolts right up?



AJ