Rotary Engine Building, Porting & Swaps All you could ever want to know about rebuilding and porting your rotary engine! Discussions also on Water, Alcohol, Etc. Injection

? For Judge Ito:

Thread Tools
 
Search this Thread
 
Old 04-07-2005, 07:26 PM
  #1  
Junior Member
Thread Starter
 
whitekingsnake's Avatar
 
Join Date: Sep 2003
Posts: 22
Default

Hey judge or anyone who may know,



I sent my injectors to get cleaned and thought about replacing some stuff.



What is your opinion on replacing the air bleed diffusers and the rubber grommets that accompany them? I put new ones in when i replaced my engine 80k and 3 1/2 years ago.



I have new ones to go in but kinda don't want to get that involved with tearing it down that far.



Any help is appreciated.



Thanks...Scott
whitekingsnake is offline  
Old 04-07-2005, 08:01 PM
  #2  
Senior Member
 
fc3sboy1's Avatar
 
Join Date: May 2003
Location: watertown wisconsin
Posts: 1,331
Default

anytime you have the injectors out for service its a very good idea to replace the gromits as far as the defuzers unless there broken i wouldnt worry too much about them.

thats my 1/2 cent.
fc3sboy1 is offline  
Old 04-07-2005, 08:03 PM
  #3  
Junior Member
Thread Starter
 
whitekingsnake's Avatar
 
Join Date: Sep 2003
Posts: 22
Default

that was my thinking, but was curious on how brittle they may have become.
whitekingsnake is offline  
Old 04-07-2005, 09:57 PM
  #4  
Junior Member
Thread Starter
 
whitekingsnake's Avatar
 
Join Date: Sep 2003
Posts: 22
Default

Well i just took out my rear secondary diffuser (air bleed), and for an engine with 80k and 3 1/2 yrs use the o rings were like new. The diffuser was not brittle at all. Still very strong.
whitekingsnake is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DJ Rotor
Rotary Engine Building, Porting & Swaps
4
02-07-2003 09:20 PM
vosko
Rotary Engine Building, Porting & Swaps
36
01-26-2003 02:28 AM
vosko
Insert BS here
39
10-04-2002 12:07 PM
vosko
Insert BS here
14
01-17-2002 10:17 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: ? For Judge Ito:



All times are GMT -5. The time now is 06:47 AM.