I need new fuel injector gromets
#1
My gromets are badly dry rotted, can I trust ordering them from an auto parts store or should I just get them right from mazda? In my past experaince I have found some things from an auto parts store just dont fit or do a good job like the factory parts.
I have found a series of vacuume leaks as such through out my intake system, I'm hoping after i fix the leaks the car will run right. It ran before but it was very unhappy.
I have found a series of vacuume leaks as such through out my intake system, I'm hoping after i fix the leaks the car will run right. It ran before but it was very unhappy.
#7
Basicly all I'm after is a solution that is fail proof. I dont want to be forced to take the upper intake manifold off later because the injectors have a leak. I dont want to spend big money and i'm all about tricks and alternitive methods.
I'll try the 3/8" fuel tubing as long as it is proven, my only question is how long do i cut them, my old gromets were so badly rotted they fell appart when i took them appart so i have nothing to measure.
I'll try the 3/8" fuel tubing as long as it is proven, my only question is how long do i cut them, my old gromets were so badly rotted they fell appart when i took them appart so i have nothing to measure.
Thread
Thread Starter
Forum
Replies
Last Post
RX73rdgen
3rd Generation Specific
3
12-28-2002 07:55 PM
RX73rdgen
3rd Generation Specific
2
12-23-2002 09:18 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)