Hylomar on housing legs
Senior Member
Joined: Aug 2005
Posts: 381
From: Freeport FL
The vid does use hylomar there and according to other builder friends of mine that don't use it but say you technically could. I think it is a safer then sorry type of thing. The sealant is only used there to confirm imperfections in the metal seal.
In my practice I do not feel comfortable sealing it with a gelitan tack that never cures and does wear and or burn away. This makes me feel uncomfortable to send the motor to a customer when I could of used a cured sealant properly and be more asured.
In my practice I do not feel comfortable sealing it with a gelitan tack that never cures and does wear and or burn away. This makes me feel uncomfortable to send the motor to a customer when I could of used a cured sealant properly and be more asured.
Member
Joined: Apr 2004
Posts: 79
Originally Posted by rotorwiki' post='863506' date='Mar 14 2007, 10:08 AM
Looks like I'll be picking up some RTV on my next trip...
Whats your preference of RTV?
Blue
http://www.autobarndeals.com/catalog/per80022.jpg
Senior Member
Joined: Jun 2003
Posts: 917
From: Grand Prairie, TX
Originally Posted by rotorwiki' post='863354' date='Mar 13 2007, 12:14 PM
I'll be stacking a rebuild here in the next couple weeks and I'm wondering about the lower leg sections of the housings. Most people use RTV (copper or black), but I'm wondering why I couldn't use Hylomar on these sections. I've read the specs on Hylomar and its pretty high temp and is perfect for close fitting areas. Its also self-healing.. so if a gap DID occur from vibration, it would close the gap and prevent leakage.. (in theory).
Just an idea... has anyone played with this?
Up until more recently when Hylomar became more difficult to attain, I used it in said manner for several years and never thought twice about it. It seemed to work just fine for me, and I've built alot of motors in that time frame.
B
Senior Member
Joined: Jun 2004
Posts: 524
Originally Posted by rotorwiki' post='863506' date='Mar 14 2007, 10:08 AM
Whats your preference of RTV?
A Chevy dealership wrench clued me in to Right Stuff sealant. It's what you use if you don't want it to leak, period.
Senior Member
Joined: Jan 2007
Posts: 115
Originally Posted by heretic' post='863561' date='Mar 14 2007, 05:16 PM
A Chevy dealership wrench clued me in to Right Stuff sealant. It's what you use if you don't want it to leak, period.
Fabricator
Joined: Jan 2004
Posts: 1,322
From: Central Ohio (Hebron) Zephyrhills Fla.
Originally Posted by rotorwiki' post='863526' date='Mar 14 2007, 01:45 PM
Hylomar is difficult to attain?
Permatex® Hylomar® Aerosol High-Temp Gasket Dressing
The original non-hardening, high temperature sealant designed for Rolls Royce. Ideal for threaded fittings where locking is not desired. Temperature range -65˚F to 600˚F (-54˚C to 315˚C). Gas and shop fluid resistant. Sensor safe. LEVEL 1. Suggested applications: Use on paper, cork, asbestos, metal and other preformed, cut gaskets.
Might not be the best choice for the housings, but it is used by everyone pulling gear boxes apart between sessions.
I use 100% GE silicone tub and tile caulk. Also used instead of an exhaust flange gasket.
Lynn E. Hanover
Picture is a 12A front iron with a steel tube showing the path of the external oil supply to the front stationary gear.
Senior Member
Joined: May 2002
Posts: 22,465
From: California
Originally Posted by rotorwiki' post='863506' date='Mar 14 2007, 11:08 AM
Looks like I'll be picking up some RTV on my next trip...
Whats your preference of RTV?
i use the mazda stuff or ultra grey.