Which Die Grinder Will Do The Whole Job.
07-04-2005, 06:27 PM
#12
Member
Thread Starter
Join Date: Jul 2005
Location: New Zealand
Posts: 31
[quote name='Judge Ito' date='Jul 4 2005, 03:10 PM']Makita brand die grinder. I've used it 4 many years with great results. it turns at 25,000 rpm's
[/quote]
Cool thats what I was initially looking at but there was two types
*8mm 7,000-28,000 rmp 750watt beast but its like 370mm long
*6mm 25,000 rmp 240watt at 280mm long was the one i was like being smaller and therefore better for the job easier to use etc cheaper is also a good thing.
Thanks for replys really helped!!!!
[snapback]734077[/snapback]
[/quote]
Cool thats what I was initially looking at but there was two types
*8mm 7,000-28,000 rmp 750watt beast but its like 370mm long
*6mm 25,000 rmp 240watt at 280mm long was the one i was like being smaller and therefore better for the job easier to use etc cheaper is also a good thing.
Thanks for replys really helped!!!!
07-04-2005, 08:35 PM
#13
Senior Member
Join Date: Aug 2004
Posts: 426
[quote name='Lynn E. Hanover' date='Jul 4 2005, 05:22 AM']I was refering to the $100.00 job that weighs about 3 pounds and is a foot long. You broke three of those?
Lynn E. Hanover
[/quote]
i don't know about over a foot, but it's right about there i think... sears version of the rotozip, right?
i bought the electric one because my compressor is too small and i've got ADD, so i can't just wait for it to fill back up, i gotta keep grindin' with something.
but problem will be solved very shortly--dad came over and wired up the 220 in the new shop with me, so i can now buy a decent compressor
220, 221...whatever it takes
Lynn E. Hanover
[snapback]733920[/snapback]
[/quote]
i don't know about over a foot, but it's right about there i think... sears version of the rotozip, right?
i bought the electric one because my compressor is too small and i've got ADD, so i can't just wait for it to fill back up, i gotta keep grindin' with something.
but problem will be solved very shortly--dad came over and wired up the 220 in the new shop with me, so i can now buy a decent compressor
220, 221...whatever it takes
07-04-2005, 09:19 PM
#14
Fabricator
Join Date: Jan 2004
Location: Central Ohio (Hebron) Zephyrhills Fla.
Posts: 1,322
[quote name='guitarjunkie28' date='Jul 4 2005, 05:35 PM']i don't know about over a foot, but it's right about there i think... sears version of the rotozip, right?
i bought the electric one because my compressor is too small and i've got ADD, so i can't just wait for it to fill back up, i gotta keep grindin' with something.
but problem will be solved very shortly--dad came over and wired up the 220 in the new shop with me, so i can now buy a decent compressor
220, 221...whatever it takes
[/quote]
No, not the rotor-zip thing.
An old fashioned die grinder like in WWII.
A nice piece, if a bit pricy.
Lynn E. Hanover
i bought the electric one because my compressor is too small and i've got ADD, so i can't just wait for it to fill back up, i gotta keep grindin' with something.
but problem will be solved very shortly--dad came over and wired up the 220 in the new shop with me, so i can now buy a decent compressor
220, 221...whatever it takes
[snapback]734121[/snapback]
[/quote]
No, not the rotor-zip thing.
An old fashioned die grinder like in WWII.
A nice piece, if a bit pricy.
Lynn E. Hanover
07-04-2005, 09:23 PM
#15
Fabricator
Join Date: Jan 2004
Location: Central Ohio (Hebron) Zephyrhills Fla.
Posts: 1,322
[quote name='l8t apex' date='Jul 4 2005, 06:19 AM']HAHAHA hey and hang on when it bites!I was diggin shards out my hands 1st time.
Lynn ... do you use a oil when grinding? It saves a lot of bits especially when hitting the aluminum.
[/quote]
I use a block of bees wax. But oil works fine if a bit messy. Resist the urge to use WD-40 for this. Heated WD burns great.
Lynn E. Hanover
Lynn ... do you use a oil when grinding? It saves a lot of bits especially when hitting the aluminum.
[snapback]733935[/snapback]
[/quote]
I use a block of bees wax. But oil works fine if a bit messy. Resist the urge to use WD-40 for this. Heated WD burns great.
Lynn E. Hanover
07-04-2005, 09:32 PM
#16
Fabricator
Join Date: Jan 2004
Location: Central Ohio (Hebron) Zephyrhills Fla.
Posts: 1,322
[quote name='l8t apex' date='Jul 4 2005, 06:19 AM']HAHAHA hey and hang on when it bites!I was diggin shards out my hands 1st time.
Lynn ... do you use a oil when grinding? It saves a lot of bits especially when hitting the aluminum.
[/quote]
http://www.harborfreight.com/cpi/ctaf/Disp...temnumber=44141
Here is the link to the Harbor Fright grinder I have. Hard to beat that price.
Lynn E. Hanover
Lynn ... do you use a oil when grinding? It saves a lot of bits especially when hitting the aluminum.
[snapback]733935[/snapback]
[/quote]
http://www.harborfreight.com/cpi/ctaf/Disp...temnumber=44141
Here is the link to the Harbor Fright grinder I have. Hard to beat that price.
Lynn E. Hanover
07-05-2005, 01:34 AM
#18
Senior Member
Join Date: Oct 2003
Location: I don't really exist ...
Posts: 500
this has just become my favorite thread. i'm working on my exhausts now and their giving me a beating. i think i'm a very patient man, but my Dremel is getting bitch-slapped on the regular by the rotor housing and insert.
07-05-2005, 11:48 AM
#20
Senior Member
Join Date: Aug 2004
Location: San Diego
Posts: 186
I'm with the Judge on this I have been using the Makita's for years no problems. http://www.mytoolstore.com/makita/mak08-08.html I've had the standard one for over 7years and has seen many an engine amongst other things and the bearing is finally giving in but is still useable. I now have the GD0800C which has a variable speed of 7,000-28,000 RPM. Also buy the correct bits for porting especially for the aluminum housings. They sell a bit specifically for aluminum and it makes life alot more easy. They sell cutting oils which work great I just use good old Castrol 20w50 works for me to keep my bits sharpe and last longer. Also a good idea is us a layout fluid like Dykem http://www.freemansupply.com/DykemBlueLayoutFlu.htm helps to see your port template and doesn't get affected by the oil and it's easy to remove with carb spray.