clearance qustion

Reply Subscribe

Thread Tools

Search this Thread

01-16-2006, 07:40 PM

rotaryxs@cox.net

Junior Member

Thread Starter

Join Date: Jan 2005

Posts: 6

When clearing side seal to corner seal, is it .003 on each end.? Is apex to corner seal .002 on each side?

If so, do I clear .004 on one side to allow for .002 eachside?

01-16-2006, 10:50 PM

EVLRX-4

Junior Member

Join Date: Oct 2005

Location: Australia, Melbourne

Posts: 20

its .004 on the one end just push the side seal all the way agianst the corner seal and measure the gap at the other end

01-17-2006, 02:34 AM

The Ultimate 7

Member

Join Date: Oct 2003

Posts: 69

Quote:

Originally Posted by rotaryxs@***.net' post='794554' date='Jan 16 2006, 05:40 PM

When clearing side seal to corner seal, is it .003 on each end.? Is apex to corner seal .002 on each side?

If so, do I clear .004 on one side to allow for .002 eachside?

The apex to corner seal is .002 on one side not both. The side seal to corner seal is .002-.006. If you clearance to the minimum .002, you will greatly improve the engines compression provided everything else is well with spec.