Rotary Engine Building, Porting & Swaps All you could ever want to know about rebuilding and porting your rotary engine! Discussions also on Water, Alcohol, Etc. Injection

Causes Of Low Oil Pressure?

Thread Tools
 
Search this Thread
 
Old 11-26-2003, 01:52 AM
  #1  
Member
Thread Starter
 
93redfd's Avatar
 
Join Date: Sep 2002
Posts: 60
Default

Ok, my stock oil pressure guage sometimes sits on 0 at idle. Sometimes it bounces when im on the gas, I think the sending unit may be broke. Lately I have been hereing a sqeaking noise, it sounds like it coming from my turbo. It only sqeaks when that damn guage gets low. I hate to say it but i believe I have low oil pressure. Would this be signs of a low oil pressure, or just a bearing or something in my turbo. It doesnt do this untill the guage dropes down. problems problems and more fuckn problems. Im getting to the point where its time to say bye bye.
93redfd is offline  
Old 11-26-2003, 01:53 AM
  #2  
Member
Thread Starter
 
93redfd's Avatar
 
Join Date: Sep 2002
Posts: 60
Default

also, is there anyway it would be my fualt the engine has low oil pressure.? I didnt put it together.
93redfd is offline  
Old 11-26-2003, 02:21 AM
  #3  
Senior Member
 
jspecracer7's Avatar
 
Join Date: May 2002
Location: Okinawa, Japan
Posts: 4,928
Default

What are you using to gauge your oil pressure? The stock unit? My stock unit reads 0 at idle But according to my Defi, it reads 2.7 kilos(appx 40 psi)
jspecracer7 is offline  
Old 11-26-2003, 03:25 AM
  #4  
Senior Member
 
sidewinderx7's Avatar
 
Join Date: Jun 2002
Location: WA
Posts: 1,312
Default

my stock one is all weird and freaky also.. it does strange readings... of course my engine DID blow up... lol
sidewinderx7 is offline  
Old 11-26-2003, 12:28 PM
  #5  
Member
Thread Starter
 
93redfd's Avatar
 
Join Date: Sep 2002
Posts: 60
Default

thats whats scaring my right now. I know the stock gauge is a piece but im getting sqeak from the turbo when the gauge reads 0. The motor has good pressure on initial startup, almost 120
93redfd is offline  
Old 11-26-2003, 03:01 PM
  #6  
Senior Member
 
BigTurbo74's Avatar
 
Join Date: Jul 2002
Posts: 2,315
Default

haha are you making paranoid noises in your head? if you are so worried about it get an aftermarket gauge.
BigTurbo74 is offline  
Old 11-26-2003, 03:18 PM
  #7  
Member
Thread Starter
 
93redfd's Avatar
 
Join Date: Sep 2002
Posts: 60
Default

yes Im very ******* paranoid sence this is the 3rd motor that I have put in this year. The turbo has shaft play. wtf. Im about to sell this **********er!!!!!!!!!!!!
93redfd is offline  
Old 11-26-2003, 04:09 PM
  #8  
Senior Member
 
Mazderati's Avatar
 
Join Date: May 2002
Posts: 334
Default

The design of the oil pressure sending unit on FD's is failure prone. You could replace it but it is most likely going to go bad again in a relatively short time.



I would guess your oil pressure fine.
Mazderati is offline  
Old 11-26-2003, 04:16 PM
  #9  
Senior Member
 
Mazderati's Avatar
 
Join Date: May 2002
Posts: 334
Default

I would, however, check it to make sure.
Mazderati is offline  
Old 12-01-2003, 12:11 AM
  #10  
Senior Member
 
pk797's Avatar
 
Join Date: Dec 2002
Location: Queens, New York
Posts: 204
Default

Thanks for the profound insite Mazderati.
pk797 is offline  


Quick Reply: Causes Of Low Oil Pressure?



All times are GMT -5. The time now is 05:50 AM.