13b Bridge Port 6-port
01-23-2005, 05:18 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: kissimmee fl
Posts: 236
alot of people say it cant be done but here it is...........i just bought my brother rx7 which i ported a while back ....it is a 6-port bridge port .............
secondary plates are not ported except for the bridge ports
primary plates are lightly ported and brigde
secondary plates are not ported except for the bridge ports
primary plates are lightly ported and brigde
01-23-2005, 05:25 PM
#2
Senior Member
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
I've done a few fully bridgeported 6 port engines. I also bridgeported my Rx8 renesis engine. It's my daily driver. I really like the bridgeported 6 port engines. They have some serious potential. many people just disregard them.
01-23-2005, 05:32 PM
#3
Senior Member
Thread Starter
Join Date: Jan 2004
Location: kissimmee fl
Posts: 236
the car drove really strong all the way to 4500 rpm then after that it dint have enough fuel ..............i used every thing stock with a modified flow meter and 550 on seconday ..............
01-23-2005, 05:43 PM
#5
Senior Member
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
Originally Posted by Aurosting' date='Jan 23 2005, 11:34 PM
01-23-2005, 06:07 PM
#7
Senior Member
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
connect the dots. make the eyebrow larger. spend some time porting the back side of the opening of the port. (inside the runners) if you make the eyebrow larger, your going to need a differen t apex seal. I use atkins 2 piece 2mm apex seals with oem apex seal springs. works great. I could go on and on about how you could improve your ports. Are you bored? this could get long.. today is sunday. I guess we could write a little.. go ahead ask more specific questions..
