1 Attachment(s)
Did the steering mod took me about 15 mins of work and 6$ at ace worth of aluminum tubing that I used for a spacer, have enough extra to do like 20 cars.
I can make a u turn in the street now w/o touching the curbs and I only used 1/4" spacer due to the fact that there is not enough room to ajust the toe in to where I want it with any larger spacer. seems I could have more steering angle if the tire wasn't hitting the sway bar. also to settle some other disputes there is over 2 inches till the tice hits the lower control arm. I could only get them to hit w/o the tie rod attached to the spindle. BEFORE: |
1 Attachment(s)
AFTER:
|
May not look like much buts thats all there is to gain. Looks are deciveing it feels a ton better!
|
Shim the steering tie rod down?
-Ted |
Can you go into more detail on exactly what you did? Pics would be especially helpful.
|
Yes, please go into some more detail.
|
1 Attachment(s)
I did this:
curtasy of Ranzo an now that i understand the pricipal of the device I will be making a tredded insert that threads into the steering rack and the tie ros will thread into it to maximise the steering of the FC. you WILL need a lesser offset wheel to clear the sway bar. |
I can't read those words... https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
Can you do this to a FD?
|
I don't see why not, most steering racks are nearly the same.
|
All times are GMT -5. The time now is 06:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands