I plan on having these mods...but sure what fuel pump and injectors.. if not more...



Intake

Downpipe

Resonated midpipe

Catback

FMIC

non seq factory turbos

big street port

power fc



I plan on going single.. but don't know when and can't say it would be soon... so I'm thinking.. Walboro pump and 550cc/1200cc inj combo... yes? .. no?



Help...



for anyone using SS braided lines.. what size do you use? -6?

just go 550/1600's Loi at sportcarmotion has a special on them right now with the fuel rail!!!!

I'm just concerned.. what if i don't go single next year? wouldn't 1600cc be overkill?



what do you think as far as a pump.. i wanna go w/ an intank...

walbro pump is fine for stock twins. 550/1600's are fine for stock turbo's also. you have a powerFC it will have to be tuned. the bosch injectors are very good

if you worry about over kill you can go with 1300cc 850 bored from RC ,they are more expensive. about $320 a set with stock secondary exchanged. I have walbro pump on my single fd right now also. the walbro should be good enough for 450hp?

walbro maxes out around 400hp..... after that you need to have two walbro's in the tank https://www.nopistons.com/forums/pub...DIR#>/wink.png

anyone here has a pictures of the two walbro pumps setup on a fd?

Maybe not 2 walboro's in an FD, but 2 stock FD pumps in an FD. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

show me the pics jspecracer 7. seem to me it will work the same way not matter which pump?