I plan on having these mods...but sure what fuel pump and injectors.. if not more...



Intake

Downpipe

Resonated midpipe

Catback

FMIC

non seq factory turbos

big street port

power fc



I plan on going single.. but don't know when and can't say it would be soon... so I'm thinking.. Walboro pump and 550cc/1200cc inj combo... yes? .. no?



Help...



for anyone using SS braided lines.. what size do you use? -6?

just go 550/1600's Loi at sportcarmotion has a special on them right now with the fuel rail!!!!

I'm just concerned.. what if i don't go single next year? wouldn't 1600cc be overkill?



what do you think as far as a pump.. i wanna go w/ an intank...

walbro pump is fine for stock twins. 550/1600's are fine for stock turbo's also. you have a powerFC it will have to be tuned. the bosch injectors are very good

if you worry about over kill you can go with 1300cc 850 bored from RC ,they are more expensive. about $320 a set with stock secondary exchanged. I have walbro pump on my single fd right now also. the walbro should be good enough for 450hp?

walbro maxes out around 400hp..... after that you need to have two walbro's in the tank https://www.nopistons.com/forums/pub...DIR#>/wink.png

anyone here has a pictures of the two walbro pumps setup on a fd?

Maybe not 2 walboro's in an FD, but 2 stock FD pumps in an FD. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

show me the pics jspecracer 7. seem to me it will work the same way not matter which pump?

me2:

I'm getting ready to get another Waldo. I'm looking for ideas / experiences plumbing the duo. I've seen a twin-waldo'ed supra. He just Y'ed them together though a big nitrous fitting. Seems to work ok, he put down 620 while I watched, w/o hitting the 100-shot button - impressive.



I figure they gotta come together sometime - why not intank?



Steve C.

Im going to run 1600x4 eventually.. right now while im on the twins im going to go with the K2RD raiol and 2 bosh 1600's.. ill be ordering them within a month or so Loi =]



Josh

https://www.nopistons.com/forums/pub...#>/biggrin.png Twin Walboro's

:yum:

oh sexy! I will do that sonner or later.

jayspec7, let me know how it go. i'm running the two walrbo too. except one intank and one inline.



neoamd, i have about 16 sets in stock. no worry lol

that was a pic I found on the other forum...



i'm debating on the Nippondenso or Walboro pump...

why bother with that intank setup ? your spending the money get a sump!!! and external fuel pump which is easily upgradable later.............

Sunday afternoon, I will be doing my fuel setup with dual stock FD pumps. Hopefully it works out good;)

jayspec

im runnin ND fuel pump with 1300cc 2ndaries injs from SR..

im short IC and port from your list but runnin seq..

i rarely see past 70% inj dc at WOT...

powerfc tuned with dyno values of 275rwhp @ 10psi