Hi, I had a question I saw a video that day a 700hp motor in japan. I wanted to know what kind of mods do I need to make a 700hp motor. How much money do I have to invest?
|
the one with the 5 lil jap guys sitting in the trunk? That vid is funny!
|
what kind of motor? a 4-rotor makes that n/a. :bigok: a couple big turbos or a big single at like 40+psi, nitrous would make it alot easier to get there.
|
I think thats the Scoot video. Red car, T51-R turbo, and like 5 asian guys sitting on the car covering their ears.
|
url to this video somebody?
|
i have it here.... http://www.vosko.net/media/
i think that is a semi p-port or something at 1.8bar of boost.... lol |
now is that possilbe to make a 700hp 13b?
|
|
I remember that vid, thats rocks!
|
Originally Posted by crzy Rotary' date='Dec 25 2002, 03:13 PM
now is that possilbe to make a 700hp 13b?
|
:bigthumg: thank you sir! I shall find out how much would I need to invest and hopefully start on it early june.
|
Originally Posted by Silver Ninety Three' date='Dec 24 2002, 09:52 PM
Red car, T51-R turbo, and like 5 asian guys sitting on the car covering their ears.
|
I priced this a while ago for a customer.
Im pretty sure it was around $19,000 for the motor, turbo kit, computer and all the trimmings to make 700hp or very close to it.... ALL FROM RE There are many smaller companies that do specials like this quite often. The usually do it for around $17,000 or close to it Jason www.jt-imports.com |
Originally Posted by JT-Imports' date='Dec 27 2002, 08:02 PM
I priced this a while ago for a customer.
Im pretty sure it was around $19,000 for the motor, turbo kit, computer and all the trimmings to make 700hp or very close to it.... ALL FROM RE There are many smaller companies that do specials like this quite often. The usually do it for around $17,000 or close to it Jason www.jt-imports.com |
I can get a shot of the engine if you want? :bigok:
|
thanks guys! I appreciate for your help. :bigok:
|
Actually i believe it said it was 700ps which converts to 690 hp.
|
Originally Posted by JT-Imports' date='Dec 27 2002, 05:02 PM
I priced this a while ago for a customer.
Im pretty sure it was around $19,000 for the motor, turbo kit, computer and all the trimmings to make 700hp or very close to it.... ALL FROM RE There are many smaller companies that do specials like this quite often. The usually do it for around $17,000 or close to it Jason www.jt-imports.com |
Check out the Banzai package from Pettit racing! :bigok: Besides why would you want that much HP. Useless street car.
|
I heard it was a huge street port NOT a P Port
|
It is definitely a partial bridgeport.
Just imagine the same setup but with a full bridgeport!!! |
scoot has a semi pp motor, i cant find the pic but i assure you they do
mike |
You don't need a p port or bridge to make that kind of power.
I know Scoot does have some crazy **** though, but I heard the car in the video is a SP. |
the scoot car is a semi PP
i have engine pics of that car and pics of the intake manifold |
hi guys i am from australia .just a bit of info about 13b power .one of the pac performance cars here in australia (dont know if you have heard of them)is an rx3 sedan owned by one of their customers called ivan pushed out 798rwhp at the summer nats (the biggest car show in australia)was a 13b turbo running on c16 fuel .if i can find a video i will post a link .as yet there is none available but try
My Webpage their web page isnt up yet but will be soon |
A car I wildly ported and polished made 701rwhp on just a large street port. This was on the FD engine. 2mm stock apex seals Haltech E6k 6 bar map sensor 40lbs of boost. engine was not extra pinned. Methanol fuel.
|
Originally Posted by Judge Ito' date='Jan 20 2003, 08:22 AM
A car I wildly ported and polished made 701rwhp on just a large street port. This was on the FD engine. 2mm stock apex seals Haltech E6k 6 bar map sensor 40lbs of boost. engine was not extra pinned. Methanol fuel.
What turbo was bolted to that monster? How did it drive? |
Originally Posted by SPEED_NYC' date='Jan 20 2003, 01:09 AM
the scoot car is a semi PP
i have engine pics of that car and pics of the intake manifold |
i have it here.... http://www.vosko.net/media/ i think that is a semi p-port or something at 1.8bar of boost.... lol I can get a shot of the engine if you want? |
i have the pics, i told 93r1 to send me his e-mail addy so i can mail them to him. i dont know how to upload pics. you guys will have engine and bare intake manifold pics tomorow
|
:bigthumg:
|
i have the pics, i told 93r1 to send me his e-mail addy so i can mail them to him. i dont know how to upload pics. you guys will have engine and bare intake manifold pics tomorow https://www.nopistons.com/~rx7machin...4c84d009b0.jpg https://www.nopistons.com/~rx7machin...b9a22e1842.jpgAt least I hope everything came out right.. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif |
the guy who sent me the pics of the bare intake manifold told me that scoot was selling them on a made to order basis. if anyone wants a semi PP motor, scoot can sell you a manifold that apparently has the correct port timing to make serious power......
|
the guy who sent me the pics of the bare intake manifold told me that scoot was selling them on a made to order basis. if anyone wants a semi PP motor, scoot can sell you a manifold that apparently has the correct port timing to make serious power...... |
PP = perifrial port
notice the 2 large runners on the intake manifold going directly into the rotor housing, instead of into the front and rear plates? those are perif ports, as opposed to side ports |
PP = perifrial port notice the 2 large runners on the intake manifold going directly into the rotor housing, instead of into the front and rear plates? those are perif ports, as opposed to side ports |
sorry i forgot to post them
|
i wonder why scoot didn't use the secondary ports too ?
|
Originally Posted by vosko' date='Jan 25 2003, 01:42 PM
i wonder why scoot didn't use the secondary ports too ?
thier motor is basically a PP drag car motor that also makes use of the primary ports just to add a lil low speed driveability, not really for increased airflow. its like having siguel's motor AND being able to idle at 1000 rpm https://www.nopistons.com/forums/pub...IR#>/smile.png |
I want to hear more about this motor/car Ito built
|
All times are GMT -5. The time now is 11:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands