Post your winter projects
01-26-2006, 07:52 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2006
Location: Spoklahoma, WA.
Posts: 532
Ok guyz and galz,
Let's here what your winter projects are ?
First off is the Codeblue car. After the wheel fell off and the fender got banged up. The fender is being fixed as we speak. I went and ordered new front break rotors. Because the drivers side lug holes where striped out...
And I will be putting them on this weekend.
Then theres (Iotus) 85 Gsl-Se turbo.
The front cover gasket needs to changed. Its has been leaking for sometime now.
With in the last few weeks I noticed the exhaust gasket is starting to leak also.
So I have some work to do.
Anywayz...Lets hear them
Let's here what your winter projects are ?
First off is the Codeblue car. After the wheel fell off and the fender got banged up. The fender is being fixed as we speak. I went and ordered new front break rotors. Because the drivers side lug holes where striped out...
And I will be putting them on this weekend.
Then theres (Iotus) 85 Gsl-Se turbo.
The front cover gasket needs to changed. Its has been leaking for sometime now.
With in the last few weeks I noticed the exhaust gasket is starting to leak also.
So I have some work to do.
Anywayz...Lets hear them
01-26-2006, 11:34 PM
#6
Senior Member
Thread Starter
Join Date: Jan 2006
Location: Spoklahoma, WA.
Posts: 532
Originally Posted by kettlman' post='796692' date='Jan 26 2006, 08:01 PM
well, i don't have much of a project. mines finished almost. will change the fuse box over soon. maybe redo the door panels befor APPLE BLOSSOM.
Are you gonna go with the animal theme this year..lol
We could paint your car like a cow.....muhahahaa
01-27-2006, 12:09 AM
#9
Senior Member
Join Date: Oct 2003
Location: WA, Renton
Posts: 714
i sorta finished my winter project.. well more like i was bored so i turboed charged a NA rx-7!!! ,
had to port match 4 port t2 manifolds to fit the 6 port block
use t2 ecu , manifolds ,and electroincs,
porting the manifolds, or well starting to anyway...
some oil return lines i made, designed to replace the oil level sender in the bottom of the oil pan, which never worked anyway....
jump to the future, allmost done...
ya the wirings bad, but the car kinda came like that,, what do u expect for a 100 dollar car??
drives now after some grounding issues it runs fine and idles fine now!! w00t, have put about 500 miles on it so far, and its definitly alot faster then it was, even while only running 5 psi
had to port match 4 port t2 manifolds to fit the 6 port block
use t2 ecu , manifolds ,and electroincs,
porting the manifolds, or well starting to anyway...
some oil return lines i made, designed to replace the oil level sender in the bottom of the oil pan, which never worked anyway....
jump to the future, allmost done...
ya the wirings bad, but the car kinda came like that,, what do u expect for a 100 dollar car??
drives now after some grounding issues it runs fine and idles fine now!! w00t, have put about 500 miles on it so far, and its definitly alot faster then it was, even while only running 5 psi