New Member
05-16-2005, 04:35 AM
#1
Junior Member
Thread Starter
Join Date: May 2005
Posts: 22
hi peeps
I didnt even see this as a new member section
BUT now that i have
I will regrace my ignorance..
little bit about myself..
my name is Leroy and am 32 years old, own my own aluminium fabrication
company do full custo items from piping, intercoolers, radiators, surge tanks
catch cans etc etc etc.. I have specialized in work on rotaries for the last 3 years
as that is what Im into but I do do all other cars as well..
I also do a full custom cover for when you remove your water pump to go electric
water pump. cam make with DASH FITTINGS for anodized fittings or your standard
hose type set up...
below is one of my first jobs 3 years ago with rotors and pictured engine bay is of
a neat granma looking RX2 with full on rotor powered 13bt with a to4/66 on gas
below picture is of a opil cooler to suit all rotories just need to know model
The next one is of a RX4 with a 20b and GT42R only done about 6 months ago
its not yet finished so no read outs for it but the owner should be too far off..
also in the last picture shows my own version of a throttle body hat full polished
would set you back $195AUD fully polished +post..
lucky last the item below is of the water pump removal housing for when you use a
electric water pump.
These sell for $110AUD unpolished and $140AUD polished with dash 16 or 20
weld on bungs are $180 polished, in the very first pic of the RX2 is of the same
design that I welded the dash bungs on to give you an idea..
You can click the link below to see the response I get from the australian market
so Im sure if I have to I will please you guys too
CLICK HERE FOR FEED BACK
please enjoy and dont hesitate to email me your wants and I will do my best to help you
regards
LeRoy
I didnt even see this as a new member section
I will regrace my ignorance
little bit about myself..
my name is Leroy and am 32 years old, own my own aluminium fabrication
company do full custo items from piping, intercoolers, radiators, surge tanks
catch cans etc etc etc.. I have specialized in work on rotaries for the last 3 years
as that is what Im into but I do do all other cars as well..
I also do a full custom cover for when you remove your water pump to go electric
water pump. cam make with DASH FITTINGS for anodized fittings or your standard
hose type set up...
below is one of my first jobs 3 years ago with rotors and pictured engine bay is of
a neat granma looking RX2 with full on rotor powered 13bt with a to4/66 on gas
below picture is of a opil cooler to suit all rotories just need to know model
The next one is of a RX4 with a 20b and GT42R only done about 6 months ago
its not yet finished so no read outs for it but the owner should be too far off..
also in the last picture shows my own version of a throttle body hat full polished
would set you back $195AUD fully polished +post..
lucky last the item below is of the water pump removal housing for when you use a
electric water pump.
These sell for $110AUD unpolished and $140AUD polished with dash 16 or 20
weld on bungs are $180 polished, in the very first pic of the RX2 is of the same
design that I welded the dash bungs on to give you an idea..
You can click the link below to see the response I get from the australian market
so Im sure if I have to I will please you guys too
CLICK HERE FOR FEED BACK
please enjoy and dont hesitate to email me your wants and I will do my best to help you
regards
LeRoy
05-22-2005, 01:07 AM
#9
Junior Member
Thread Starter
Join Date: May 2005
Posts: 22
[quote name='ambassador_josh' date='May 22 2005, 12:30 PM']Tengo gusto de esos coches. Demasiado malo usted está en Australia. ¿Usted envía en ultramar?
[/quote]
Im not sure why I got the question asked in spanish as I have noticed you can
write ENGLISH..
but here goes
translated to english
I have pleasure of those cars. Too bad you are in Australia. You send overseas
Its good to see you have these types of cars over there, It doesnt need to be too
bad im in australia and yes I do send to the overseas market..
regards
LeRoy
[snapback]716285[/snapback]
[/quote]
Im not sure why I got the question asked in spanish as I have noticed you can
write ENGLISH..
but here goes
translated to english
I have pleasure of those cars. Too bad you are in Australia. You send overseas
Its good to see you have these types of cars over there, It doesnt need to be too
bad im in australia and yes I do send to the overseas market..
regards
LeRoy