Yes, high beam will be halogen if you only want the low beam HID upgrade.



Chuck

As long as you cut the frame like shown on the instruction, you will be able to bolt back the stock headlight motor assembly and use the pop up lights.



Chuck

just a note!!!





if you are using the same configuration for the stock headlights where you the driving beams turn off while the high beams are on, be aware that when you flicker your lights, it is very bad for your HID bulbs and ballasts. so when it is installed, chuck has instructions on his page to set them to go "non sequential" https://www.nopistons.com/forums/pub...DIR#>/wink.png so you can save the life of your expensive lighting system.





thanks for the info chuck...... im considering going back to pop ups

chuck, i have your sleek kit, and i have the motor from my stock setup, what else would i need to install this kit? do they use the same hella housings?



(this is just brainstorming, nothing to be taken seriously yet ... hehe)

I'm interested as well. Hated the stock headlight but don't like the sleek light look either.



In order to get a lower height, I assume you're making a shorter actuator arm as part of the kit?

You will reuse the Hella lights. So pretty much you will be buying the kit with everything but the Hella lights.



Chuck

Nope, I don't touch the arm itself. I relocate the mounting point so the light pops up lower. The new mounting point will be on the bracket that holds the Hella lights.



Chuck

Do you have any pics of the kit yet?The deadline will be here soon

Chuck is there any pictures or updates? I would like to get a set, but would like to see what they are going to look like first.

Where are the pictures?