Feed Fd Sideskirt Install Help!
11-21-2003, 07:01 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Denver, CO
Posts: 4,985
I can't figure out exactly how to mount these FEED sideskirts. I remove the black thingy in the rear, and the mudflap in the front, I see there is two divots in the rear of the skirt, which I assume are to be drilled through and I am to use the black thing's screws. Also, the front appears to be attached by a larger body bolt in the front most divot on the skirt. I'm concerned about alignment, being sure I have the right holes, etc. Any advice on mounting, which holes to use, finding the exact drilling location, etc?
11-22-2003, 02:14 AM
#5
Senior Member
Join Date: Jan 2003
Location: union, new jersey
Posts: 8,079
you dont need to take the mudflaps off..... if you pay attention to the contour of the side skirts...... you'll notice that the front end tapers down to fit with the mud flaps.
there are two bolts in front of the rear wheels and behind the front wheels..... take them off
then drill a hole on aproximately where they would insert on the side skirts
use 3m double sided tape and place the side skirts wehre they are supposed to be, place back the screws (dont forget to use washers)
and voila!!! you're done
there are two bolts in front of the rear wheels and behind the front wheels..... take them off
then drill a hole on aproximately where they would insert on the side skirts
use 3m double sided tape and place the side skirts wehre they are supposed to be, place back the screws (dont forget to use washers)
and voila!!! you're done
11-22-2003, 11:45 AM
#6
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Denver, CO
Posts: 4,985
Originally Posted by FikseRxSeven' date='Nov 22 2003, 02:14 AM
you dont need to take the mudflaps off..... if you pay attention to the contour of the side skirts...... you'll notice that the front end tapers down to fit with the mud flaps.
there are two bolts in front of the rear wheels and behind the front wheels..... take them off
then drill a hole on aproximately where they would insert on the side skirts
use 3m double sided tape and place the side skirts wehre they are supposed to be, place back the screws (dont forget to use washers)
and voila!!! you're done
there are two bolts in front of the rear wheels and behind the front wheels..... take them off
then drill a hole on aproximately where they would insert on the side skirts
use 3m double sided tape and place the side skirts wehre they are supposed to be, place back the screws (dont forget to use washers)
and voila!!! you're done
Thanks Brothers! (Literally)
11-23-2003, 04:01 AM
#8
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Denver, CO
Posts: 4,985
Thanks, that is an important reminder. The tape doesn't stick well to dirt! I just need my detail guy to come out and buff the under-mudflap area, to match the rest of my fresh detail work.
