Newbiez
09-06-2003, 01:48 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Posts: 2
what do the motor mounts look like on the engine side of the mount, how does the engine mounts attach to the engine block? My friend and I are going to swap a 12a into my corolla but the engine does not have anything attached to it. has anyone else done this swap, any advise would be awesome, BTW the reason we are not using a 13b is because we are getting the 12a for a steal.
09-06-2003, 02:20 PM
#2
Junior Member
Join Date: Aug 2003
Location: Australia
Posts: 4
The 12a mounts are on the very front of the motor you need to get a crossmember made up to suit the mounts if you dont have mounts you can just use the ones of any gen 1 Rx7, usually the crossmember is made to bolt in the same place as the swaybar sometimes an extention can be made from your original crossmember you will obviously need professional help for such a task.
