[08:58] Steve: It's an RX7 [08:58] Joe: VERY NICE [08:58] Joe: I LIKE THE ROTARY ENGINES. [08:58] Steve: Haha, how's the commercial go? [08:58] Steve: Piston engines go 'boing boing boing' [08:59] Joe: I HAVEN'T SEEN THAT ONE [08:59] Steve: Admittedly that was before my time. [08:59] Steve: Say, 1979 [08:59] Steve: ish [08:59] Joe: HEY, I WAS JUST BEING BORN THEN [08:59] Steve: Yeah, I was negative two [09:00] Joe: NO KIDDING [09:00] Joe: HOW MANY MILES ON THE RX-7? [09:00] Joe: THEY NEED A REBUILD EVERY 60K [09:00] Steve: Uh, I think I turned 75,600 this weekend [09:00] Steve: Yeah, I had it done at 52k [09:00] Joe: NICE [09:00] Steve: blew her up racing a viper [09:01] Steve: I'm pushing 14.5psi on a reman now [09:01] Joe: MAZDA MAKES A BIG ASS ROTARY, IT'S A 6.0. [09:01] Steve: what? [09:01] Steve: Yer crazy [09:02] Steve: that would be a BIG motor [09:02] Joe: THEY MADE EM BACK IN THE DAY AND PUT THEM IN THERE LeMANS CARS. [09:02] Steve: Nah, that was a four rotor! [09:03] Steve: brb, smoke break [09:03] Joe: COOL [09:16] Joe: I'M LOOKING FOR THE ARTICLE ABOUT THE 6.0 ROTARY. I'LL SEND YOU THE LINK WHENI FIND IT, YOU'LL BE AMAZED. [09:16] Steve: Cool, [09:16] Joe: IT WAS AN AIRCRAFT ENGINE THAT WAS DROPPED INTO A CAR Any truth to that? |
maybe they measured the displacement differently.
|
true, you did take a smoke break.....
|
that was the 787b i think it was the 26b so thats 2.6L
|
Holy crap - Curtiss Wright made a 31500cc single rotor that made 782bhp at 1525 rpm.
|
seriously?
|
yes
|
see:
|
that **** never ran right
|
i dont remember any rotary with 1000hp running correctly.
|
at least for a long period of time...
|
ive been thinking about putting this 6.0 into my car though, but I'll need a t-900000000 to run with it , I'll need a big screen so i dont suck in people walking down the street when i boost
|
I wanna make a coffee table outta that big ass rotor!
|
[quote name='89 Rag' date='Jul 27 2005, 06:43 PM']I wanna make a coffee table outta that big ass rotor!
[snapback]743195[/snapback] [/quote] I'm sure you can pick one up one Ebay for like, $5. |
Many people think that doubling the litre's on a Rotary can tell you the equivalent piston powerplant it has. I.E. Our 1.3 Litre motor's are similiar to a 2.6 litre 4/5/6 cyllander car. 10 psi on 2.6 litre piston can probably do 255 no? Who knows...
Anyways, take 2.6 (787B) and double it and it's 5.2, round up to 6 litre's...and...I'm gay? https://www.nopistons.com/forums/pub...IR#>/blink.png |
[quote name='PhoenixDownVII' date='Jul 28 2005, 12:23 AM']...and...I'm gay? https://www.nopistons.com/forums/pub...IR#>/blink.png
[snapback]743215[/snapback] [/quote] the only thing that made real sense in what you just said .. |
[quote name='SilverSeven' date='Jul 27 2005, 09:02 PM']I'm sure you can pick one up one Ebay for like, $5.
[snapback]743210[/snapback] [/quote] Yeah right, I wish! |
[quote name='PhoenixDownVII' date='Jul 28 2005, 12:23 AM']Many people think that doubling the litre's on a Rotary can tell you the equivalent piston powerplant it has. I.E. Our 1.3 Litre motor's are similiar to a 2.6 litre 4/5/6 cyllander car. 10 psi on 2.6 litre piston can probably do 255 no? Who knows...
Anyways, take 2.6 (787B) and double it and it's 5.2, round up to 6 litre's...and...I'm gay? https://www.nopistons.com/forums/pub...IR#>/blink.png [snapback]743215[/snapback] [/quote] Matters what engine you look at honestly. The engine's in the srt-4 impressed me, but I later realized it is the same engine that is in the 2005 Chrsyler GT Cruiser. https://www.nopistons.com/forums/pub...1047683664.gif |
holy ****... that thing.... its huge. like almost as big as steve's penis
|
[quote name='CletusFD3S' date='Jul 28 2005, 03:09 PM']holy ****... that thing.... its huge. like almost as big as steve's penis
[snapback]743432[/snapback] [/quote] youre talking about the one in the front right, but were talking about the one in the back |
That one would make a pretty big rotary clock.
Mark |
[quote name='inanimate_object' date='Jul 28 2005, 04:50 PM']That one would make a pretty big rotary clock.
Mark [snapback]743442[/snapback] [/quote] the rotary equivalent to big ben. kevin. |
[quote name='Shane.Trammell' date='Jul 28 2005, 03:12 PM']youre talking about the one in the front right, but were talking about the one in the back
[snapback]743434[/snapback] [/quote] oh... oh.. oh.... OH!!!! i see it now! |
HMMMMmmmm
|
The E-shaft would bust your balls.
Here it is during assembly: http://208.62.166.66:82/guest/pics/big_rotary.jpg |
You could put your foot through the exhaust port.
I bet that housing would flex visibly on the power strokes.. |
a two or 3 rotor of that would be great for a boat
|
that is just amazing
|
[quote name='Shane.Trammell' date='Jul 29 2005, 01:07 PM']a two or 3 rotor of that would be great for a boat
[snapback]743660[/snapback] [/quote] Cruise ship? |
[quote name='Il RX8 lI' date='Jul 29 2005, 12:47 PM']Cruise ship?
[snapback]743676[/snapback] [/quote] maybe not that big of a boat but something pretty big |
I wonder how big the Hitachi's are on that sucker.
Think of a multi-rotor. I don't think they could make an e-shaft that big. |
[quote name='Sinful7' date='Jul 29 2005, 02:25 PM']I wonder how big the Hitachi's are on that sucker.
Think of a multi-rotor. I don't think they could make an e-shaft that big. [snapback]743688[/snapback] [/quote] i dunno some of the diesel engines out there are ginormous, someone posted picks of a 10 cylinder diesel that was in some huge boat or something on here a while ago, it looked like you could walk across the pistons. kevin. |
[SARCASM][/SACRASM]
|
|
Where are you guys finding these pictures???
|
that block was machined from a single piece of aluminum. Can you imagine the CNC machine that made it?!? Holy jebus.
|
[quote name='Sinful7' date='Jul 29 2005, 04:39 PM']that block was machined from a single piece of aluminum. Can you imagine the CNC machine that made it?!? Holy jebus.
[snapback]743740[/snapback] [/quote] that i did not know, id be amazed at the size of the raw aluminum block first, then seeing the machine that cuts it id be even more amazed. kevin. |
Haha anyone else remember Colin's photochopped turbo version? Where is that?
Mark |
I belive that huge rotary was meant for an industrial generator. 600hp at 1500 RPM or somthing, I remember reading about it a while ago.
|
[quote name='teknics' date='Jul 29 2005, 03:53 PM']that i did not know, id be amazed at the size of the raw aluminum block first, then seeing the machine that cuts it id be even more amazed.
kevin. [snapback]743744[/snapback] [/quote] id laugh my ass off when the person running the cnc put in the wrong dimentions and fucks up that giant block of aluminum..... that is very amazing and very impressve though |
All times are GMT -5. The time now is 12:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands