** POST UP YOUR PC's **
#61
Originally Posted by Mr. Ashe' date='Oct 15 2002, 11:58 PM
I hate buying OEM processors. No warranty..
#62
Heres some output from dmesg: (GNU/Linux 2.2)
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:2] APIC version 17
Processor #1 Unknown CPU [15:2] APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 2180796 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4351.59 BogoMIPS
Memory: 1036008k/1048512k available (1264k kernel code, 424k reserved, 10748k da
ta, 68k init)
Dentry hash table entries: 131072 (order 8, 1024k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 262144 (order 8, 1024k)
8K L1 data cache
12K L1 instruction cache
16384K L1 instruction cache
CPU: L1 I Cache: 16396K L1 D Cache: 8K
CPU: Intel® XEON(tm) CPU 2.20GHz
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
8K L1 data cache
12K L1 instruction cache
16384K L1 instruction cache
CPU: L1 I Cache: 16396K L1 D Cache: 8K
CPU: Intel® XEON(tm) CPU 2.20GHz
per-CPU timeslice cutoff: 0.00 usecs.
CPU0: Intel Intel® XEON(tm) CPU 2.20GHz stepping 04
calibrating APIC timer ...
..... CPU clock speed is 2180.7912 MHz.
..... system bus clock speed is 99.1268 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 4351.59 BogoMIPS
8K L1 data cache
12K L1 instruction cache
16384K L1 instruction cache
CPU: L1 I Cache: 16396K L1 D Cache: 8K
CPU: Intel® XEON(tm) CPU 2.20GHz
OK.
CPU1: Intel Intel® XEON(tm) CPU 2.20GHz stepping 04
Total of 2 processors activated (8703.18 BogoMIPS).
hdc: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63
(scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
(scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 396 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi : 2 hosts.
Vendor: IBM Model: DDYS-T36950N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 12, lun 0
scsi : detected 1 SCSI disk total.
(scsi0:0:12:0) Synchronous at 160.0 Mbyte/sec, offset 63.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 71687340 [35003 MB] [35.0 GB]
But right now I'm always using my dell latitude at the apartment, real machines are still in parents basement on the sdsl. There's a 533Mhz alpha too but I just offered it to the Hermes developer who finishes the 2.0 release
people ricing out computers... sigh.
:rice:
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:2] APIC version 17
Processor #1 Unknown CPU [15:2] APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 2180796 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4351.59 BogoMIPS
Memory: 1036008k/1048512k available (1264k kernel code, 424k reserved, 10748k da
ta, 68k init)
Dentry hash table entries: 131072 (order 8, 1024k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 262144 (order 8, 1024k)
8K L1 data cache
12K L1 instruction cache
16384K L1 instruction cache
CPU: L1 I Cache: 16396K L1 D Cache: 8K
CPU: Intel® XEON(tm) CPU 2.20GHz
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
8K L1 data cache
12K L1 instruction cache
16384K L1 instruction cache
CPU: L1 I Cache: 16396K L1 D Cache: 8K
CPU: Intel® XEON(tm) CPU 2.20GHz
per-CPU timeslice cutoff: 0.00 usecs.
CPU0: Intel Intel® XEON(tm) CPU 2.20GHz stepping 04
calibrating APIC timer ...
..... CPU clock speed is 2180.7912 MHz.
..... system bus clock speed is 99.1268 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 4351.59 BogoMIPS
8K L1 data cache
12K L1 instruction cache
16384K L1 instruction cache
CPU: L1 I Cache: 16396K L1 D Cache: 8K
CPU: Intel® XEON(tm) CPU 2.20GHz
OK.
CPU1: Intel Intel® XEON(tm) CPU 2.20GHz stepping 04
Total of 2 processors activated (8703.18 BogoMIPS).
hdc: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63
(scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
(scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 396 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi : 2 hosts.
Vendor: IBM Model: DDYS-T36950N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 12, lun 0
scsi : detected 1 SCSI disk total.
(scsi0:0:12:0) Synchronous at 160.0 Mbyte/sec, offset 63.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 71687340 [35003 MB] [35.0 GB]
But right now I'm always using my dell latitude at the apartment, real machines are still in parents basement on the sdsl. There's a 533Mhz alpha too but I just offered it to the Hermes developer who finishes the 2.0 release
people ricing out computers... sigh.
:rice:
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)