Saturday Dyno Session Pics...
#11
Originally Posted by 93 R1' date='Jul 1 2003, 06:17 PM
Whos red FD is that? The one Rich's dad is standing next to.
Damn Jay, do you take pics for a living? Your sig is awesome
Damn Jay, do you take pics for a living? Your sig is awesome
nah.. i just like taking pictures of cars..
#15
93R1,
I believe I made 325RWHP @ 10 - 10.5 PSI. Then we did a run at 17psi but had to let off at 6000rpm becasue my fuel pump couldn't keep up, I made 397RWHP I believe. We were planning on tuning for 22psi with Race Gas but my pump couldn't hang, next time. We should make 500RWHP @ 22 psi. Here sre some mods:
KDR Street Port 2mm
T-78
Haltech E6K - 3 bar map sensor
K2RD Fuel Rail, 1600's secondaries, SX Fuel Reg, Supra TT pump
Greddy 2 row front mount
Greddy Type-R BOV
Koyo Rad
AST Elimination
ACT Clutch, SR 9.5 Flywheel
Airpump, AC, & PS Are GONE!
Autometer Ultra-Lite Gauges(Boost, A/F, Water, EGT, Fuel Press)
Greddy Profec-B
M2 Trailing Arms & Toe Links
And then some!
Thanks
BigRon
I believe I made 325RWHP @ 10 - 10.5 PSI. Then we did a run at 17psi but had to let off at 6000rpm becasue my fuel pump couldn't keep up, I made 397RWHP I believe. We were planning on tuning for 22psi with Race Gas but my pump couldn't hang, next time. We should make 500RWHP @ 22 psi. Here sre some mods:
KDR Street Port 2mm
T-78
Haltech E6K - 3 bar map sensor
K2RD Fuel Rail, 1600's secondaries, SX Fuel Reg, Supra TT pump
Greddy 2 row front mount
Greddy Type-R BOV
Koyo Rad
AST Elimination
ACT Clutch, SR 9.5 Flywheel
Airpump, AC, & PS Are GONE!
Autometer Ultra-Lite Gauges(Boost, A/F, Water, EGT, Fuel Press)
Greddy Profec-B
M2 Trailing Arms & Toe Links
And then some!
Thanks
BigRon
#16
Originally Posted by BigRon' date='Jul 2 2003, 01:23 PM
93R1,
I believe I made 325RWHP @ 10 - 10.5 PSI. Then we did a run at 17psi but had to let off at 6000rpm becasue my fuel pump couldn't keep up, I made 397RWHP I believe. We were planning on tuning for 22psi with Race Gas but my pump couldn't hang, next time. We should make 500RWHP @ 22 psi. Here sre some mods:
KDR Street Port 2mm
T-78
Haltech E6K - 3 bar map sensor
K2RD Fuel Rail, 1600's secondaries, SX Fuel Reg, Supra TT pump
Greddy 2 row front mount
Greddy Type-R BOV
Koyo Rad
AST Elimination
ACT Clutch, SR 9.5 Flywheel
Airpump, AC, & PS Are GONE!
Autometer Ultra-Lite Gauges(Boost, A/F, Water, EGT, Fuel Press)
Greddy Profec-B
M2 Trailing Arms & Toe Links
And then some!
Thanks
BigRon
I believe I made 325RWHP @ 10 - 10.5 PSI. Then we did a run at 17psi but had to let off at 6000rpm becasue my fuel pump couldn't keep up, I made 397RWHP I believe. We were planning on tuning for 22psi with Race Gas but my pump couldn't hang, next time. We should make 500RWHP @ 22 psi. Here sre some mods:
KDR Street Port 2mm
T-78
Haltech E6K - 3 bar map sensor
K2RD Fuel Rail, 1600's secondaries, SX Fuel Reg, Supra TT pump
Greddy 2 row front mount
Greddy Type-R BOV
Koyo Rad
AST Elimination
ACT Clutch, SR 9.5 Flywheel
Airpump, AC, & PS Are GONE!
Autometer Ultra-Lite Gauges(Boost, A/F, Water, EGT, Fuel Press)
Greddy Profec-B
M2 Trailing Arms & Toe Links
And then some!
Thanks
BigRon
#17
Jay,
No prob. Not sure if I have a datalogit though? Does that come with the Haltech? I'm seeing if Steve can design my fuel system with part numbers, instructions, etc. Hopefully he can do it. The we can install it!
Let me know.
Thanks
Ron
No prob. Not sure if I have a datalogit though? Does that come with the Haltech? I'm seeing if Steve can design my fuel system with part numbers, instructions, etc. Hopefully he can do it. The we can install it!
Let me know.
Thanks
Ron
#18
Originally Posted by BigRon' date='Jul 2 2003, 01:47 PM
Jay,
No prob. Not sure if I have a datalogit though? Does that come with the Haltech? I'm seeing if Steve can design my fuel system with part numbers, instructions, etc. Hopefully he can do it. The we can install it!
Let me know.
Thanks
Ron
No prob. Not sure if I have a datalogit though? Does that come with the Haltech? I'm seeing if Steve can design my fuel system with part numbers, instructions, etc. Hopefully he can do it. The we can install it!
Let me know.
Thanks
Ron