1 Attachment(s)
https://www.nopistons.com/forums/pub...IR#>/bigok.gif Has anyone done this swap cosmo 13bre into rx2? I want to swap over my externals have 13bna now with supercharger and 79 5spd xsmn. I have already bought the turbo xsmn,starter,shifter,slave cylinder and a tail yoke. Should be pretty straight forward like the 13b when I installed that but wanted to take advantage of experience. I have to buy a 9.5 flywheel and larger cultch( have 95 motor). I think I've read that he turbo xsmn is the same length as a 79-85 or within a 1/2 inch. Well enough about what I think I know put it to me.
|
Sounds cool.
|
if you have a 13b in there all you have to do is put the old oil pan and front cover on the re and throw it in
mike |
Thanks Mike but where from my measurements I'll have a problem is going to be the turbo tranny in that I think the shifter is approx 4 1/2 inches back from my 79 tranny and the size of the bell housing in my tunnel. Looks like after I throw some more money at it she just keeps getting stronger.
|
Originally Posted by mrmasda' date='Sep 5 2003, 05:48 PM
Thanks Mike but where from my measurements I'll have a problem is going to be the turbo tranny in that I think the shifter is approx 4 1/2 inches back from my 79 tranny and the size of the bell housing in my tunnel. Looks like after I throw some more money at it she just keeps getting stronger.
mike |
All times are GMT -5. The time now is 09:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands