ECU Map Downloads Members can upload and download member submitted maps.

It's Fixed.... Woooooohoooo

Thread Tools
 
Search this Thread
 
Old Aug 15, 2003 | 07:58 PM
  #1  
vosko's Avatar
Thread Starter
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

thanks to BDC,turbovr6, and 94touring. finally it is fixed. took the car out for a spin. felt strong as ever. still needs tuning of course but its safe... OMG the fireballs on decel are crazy.... gotta remember to throw it in neutral in front of cops



again thanks. i was getting very annoyed i couldn't go on boost!
Old Aug 15, 2003 | 10:44 PM
  #2  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

sweet!
Old Aug 16, 2003 | 12:47 AM
  #3  
94touring's Avatar
Senior Member
 
Joined: Jul 2001
Posts: 3,346
From: Tulsa, OK
Default

Sweet!!! So what did you end up changing to smooth things out? Time to bring the timing back up to get rid of the nasty fireballs.
Old Aug 16, 2003 | 09:13 AM
  #4  
vosko's Avatar
Thread Starter
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

changed from falling to rising and life is good again... 3rd gear i can rev to around 8000 rpm.... it was at 10.0 AFR @ 10psi. i haven't turned it up to 15psi yet. i'll do that after work and see how pig rich it is... i am very happy. this means i can to the drift event in two weeks
Old Aug 16, 2003 | 10:22 AM
  #5  
94touring's Avatar
Senior Member
 
Joined: Jul 2001
Posts: 3,346
From: Tulsa, OK
Default

Cool!!
Old Aug 16, 2003 | 10:27 AM
  #6  
vosko's Avatar
Thread Starter
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

my L1 coil seems to be firing a bit wacky but the car runs fine. i'll ask judge ito about it when he gets back from vacay
Old Aug 16, 2003 | 03:44 PM
  #7  
TYSON's Avatar
Senior Member
 
Joined: Jan 2003
Posts: 2,871
From: London, Ontario
Default

You mentioned you got rid of your ignitor, I guess that's what did it. The E11 manual mentions using rising for aftermarket ignition setups. Good to know
Old Aug 16, 2003 | 04:15 PM
  #8  
vosko's Avatar
Thread Starter
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

me read a manual NEVER



Old Aug 16, 2003 | 06:07 PM
  #9  
BDC's Avatar
BDC
Senior Member
 
Joined: Jun 2003
Posts: 917
From: Grand Prairie, TX
Default

Vosko, you may wanna start leaning out bars 1 through 12 again in all ranges per the curves I sent you. If you're tossing fireballs out at decel, lean them out in ALL RANGES 2% at a time until the thing starts to buck or miss. When it does, increase by 3% and leave them. From there, mark bars 1 through 4 and take out about 5% or so. It'll help w/ the pops in theory.



B
Old Aug 16, 2003 | 06:27 PM
  #10  
vosko's Avatar
Thread Starter
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

roger that!



All times are GMT -5. The time now is 02:31 PM.