NoPistons -Mazda Rx7 & Rx8 Rotary Forum
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   ECU Map Downloads (https://www.nopistons.com/ecu-map-downloads-50/)
-   -   Finally! (https://www.nopistons.com/ecu-map-downloads-50/finally-21233/)

88fc3sw/hx83 07-28-2003 02:13 AM
Vosko,

Good to hear you're getting results.

vosko 07-28-2003 07:48 AM
i still have many more hours of tuning just gotta wait for turborotor to come up again and tune while i drive https://www.nopistons.com/forums/pub...IR#>/smile.png

turborotor 08-01-2003 01:27 AM
I"m glad i could help. It was fun going 120 the second time when is dry.



DId you figure out why the dip at 6k rpms



C

94touring 08-01-2003 01:48 AM
Ahhh you guys worry too much about 17-18 psi. I ran 18psi for a couple years just fine. Hell a few times I was at 20psi without realizing it. Crank that turbo up Vosko and see what it does.

94touring 08-01-2003 01:50 AM
Oh and Vosko I know you like to run crazy high timing, so if you go up to 18psi turn it down to at least 15 degrees please.

vosko 08-01-2003 09:57 AM
my timing is set VERY low right now. i currently having a misfiring problem @ 15 psi above 7k rpm. i actually had it this ENTIRE time.... i just thought it was tuning and not a hardware problem :(



i think my coils MIGHT be shot.... POS FD coils

j9fd3s 08-01-2003 10:59 AM
Originally Posted by vosko' date='Aug 1 2003, 06:57 AM
my timing is set VERY low right now. i currently having a misfiring problem @ 15 psi above 7k rpm. i actually had it this ENTIRE time.... i just thought it was tuning and not a hardware problem :(



i think my coils MIGHT be shot.... POS FD coils
i have 3 nearly new fd leading coils if you want

vosko 08-01-2003 05:02 PM
Originally Posted by j9fd3s' date='Aug 1 2003, 11:59 AM
[quote name='vosko' date='Aug 1 2003, 06:57 AM'] my timing is set VERY low right now. i currently having a misfiring problem @ 15 psi above 7k rpm. i actually had it this ENTIRE time.... i just thought it was tuning and not a hardware problem :(



i think my coils MIGHT be shot.... POS FD coils
i have 3 nearly new fd leading coils if you want [/quote]

that could work.............. https://www.nopistons.com/forums/pub...IR

j9fd3s 08-01-2003 10:07 PM
are you using the original fd coil? maybe you should try an fc one?



mike

vosko 08-01-2003 10:20 PM
yeah i am using my original 97k mile FD coils.......i might go MSD coils


All times are GMT -5. The time now is 06:06 AM.
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands