TEC 3 No Injector activation
03-23-2011, 10:48 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Peoria, AZ
Posts: 10,906
On my sand car, I upgraded my Tec 3 to the latest Firmware WT305T3/S,I did not have the old .BIN file so I started from scratch using the wizard. the car would not start.
A local guy came out to look tune the car he could not get it running ether, what he found was that the injectors are not firing.
I have power to them, we cam manually pull them to ground, they fire.
Needless to say we are at a loss.
Prior to the upgrade the car ran fine.
Any help would be great. Tried to call Electromotive = No Answer
HELP
A local guy came out to look tune the car he could not get it running ether, what he found was that the injectors are not firing.
I have power to them, we cam manually pull them to ground, they fire.
Needless to say we are at a loss.
Prior to the upgrade the car ran fine.
Any help would be great. Tried to call Electromotive = No Answer
HELP
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)