Got My Mirotech Finally
#1
Where do I find the Tach Input on the car? Do I have to have the Aux input and output connected to something (not planning on using the input but the output I want to use to control a fan)?
Thanks
Thanks
#2
There is a Yellow/Blue wire I believe in the stock harness that you will disconnect from the old clip/connector and it will go in the bottom left slot of the trailing coils.
I know that makes no sense....but, on the trailing coils harness, you are running the Grey/Black and the Grey/Red wire to the Pink and White wires coming from the coilpacks. Those two are the top two wires in the 4 pin connector....now on the bottom row, below the pink and white wires are two more wires....one is Yellow and one is Grey....you want to connect the old yellow/blue wire in the orignal harness to the yellow wire on the coilpacks harness. Then your tach will work.
Hope that helps.
I know that makes no sense....but, on the trailing coils harness, you are running the Grey/Black and the Grey/Red wire to the Pink and White wires coming from the coilpacks. Those two are the top two wires in the 4 pin connector....now on the bottom row, below the pink and white wires are two more wires....one is Yellow and one is Grey....you want to connect the old yellow/blue wire in the orignal harness to the yellow wire on the coilpacks harness. Then your tach will work.
Hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)