blown haltech?
#11
Originally Posted by C. Ludwig' post='885128' date='Oct 10 2007, 08:22 PM
Just call Haltech USA. 760-598-1941
The charger warning has nothing to do with the ability of the charger to supply a large amperage dose. A battery has the ability to supply well in excess of 200 amps. Just like the charger there needs to be something capable of drawing that kind of amperage for it to supply it. The text that applies to battery chargers in the E6K manual says, "Do not charge the battery with a 24V truck charger or reverse the polarity of the battery or any charging unit". Correctly hooking a battery charger to a battery connected to a Haltech system WILL NOT damage the system. Something else happened here.
The charger warning has nothing to do with the ability of the charger to supply a large amperage dose. A battery has the ability to supply well in excess of 200 amps. Just like the charger there needs to be something capable of drawing that kind of amperage for it to supply it. The text that applies to battery chargers in the E6K manual says, "Do not charge the battery with a 24V truck charger or reverse the polarity of the battery or any charging unit". Correctly hooking a battery charger to a battery connected to a Haltech system WILL NOT damage the system. Something else happened here.
when it was cold and i had the 20b and the little battery, sometimes jumping the e6k would just blow the little 3a fuse.
that was a good lesson, big engine in car with little gas tank = you actually can see the gas guage move
big engine + little battery + winter = you having a good battery charger....
#13
Live again old dead post!!!!! Got the haltech back and new problem...damn thing does not communicate in online mode so back to AUST. it goes again...thats right it could not be fixed in the US. If it don't work this time I'm dumping it and going with something new or parting out the project.
Thread
Thread Starter
Forum
Replies
Last Post
supraguy
RX-7 & RX-8 For Sale
0
05-14-2002 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)