My Rx3 will finally see the dyno
Thread Starter
Senior Member
Joined: Jan 2002
Posts: 1,915
From: NJ USA
after alot of work and stress my Rx3 will finally see the dyno on friday. set up is
: cosmo engine N/A rotors, custom intake manifold..
haltech e6k
2 stage nitrous kit
bridgeport partial peripheral port
55mm dual twm throttle body
g-force clutchless tranny
4 850cc rc engineering injectors
looking to make as much power as possible with out a turbo and go race and see what happens..
I'll have dyno info as soon as I put down some numbers. goal is 500rwhp or more with one stage and 600rwhp with 2 stages on nos..
: cosmo engine N/A rotors, custom intake manifold..
haltech e6k
2 stage nitrous kit
bridgeport partial peripheral port
55mm dual twm throttle body
g-force clutchless tranny
4 850cc rc engineering injectors
looking to make as much power as possible with out a turbo and go race and see what happens..
I'll have dyno info as soon as I put down some numbers. goal is 500rwhp or more with one stage and 600rwhp with 2 stages on nos..
Thread Starter
Senior Member
Joined: Jan 2002
Posts: 1,915
From: NJ USA
first day on the dyno with a fast tune. car makes 338rwhp N/A I didn't have enough time to fine tune since is midnight already. tomorrow I'll be tunning the maps(basically fixing the fuel curve and looking to make about 350rwhp. after that I'll start tunning my first nitrous stage. goal is 550rwhp with the first stage.. I have video footage and I'll try to have someone host it..
