430atw @ 0.91bar
12-23-2006, 05:42 PM
#1
Member
Thread Starter
Join Date: Aug 2002
Posts: 33
13b-RE base with a variety of REW and S4 bits. Trust T78-29D running at 0.92bar.
Microtech LT-8
As is shown in the graph, the power has not peaked at 7500rpm. The first set of session runs 3 weeks previous to this one was run out to 7300rpm and produced 403atw @ 0.9bar. The engine then went on to pick up 18atw between 7300 and 7500.
Cheers,
John
Microtech LT-8
As is shown in the graph, the power has not peaked at 7500rpm. The first set of session runs 3 weeks previous to this one was run out to 7300rpm and produced 403atw @ 0.9bar. The engine then went on to pick up 18atw between 7300 and 7500.
Cheers,
John
12-29-2006, 03:05 PM
#4
Member
Thread Starter
Join Date: Aug 2002
Posts: 33
Originally Posted by sonick117x' post='850413' date='Dec 26 2006, 05:17 PM
sexy dude... does the lt8 have closed loop boost control i forget
Hi,
No boost control on the LT8...only boost limit and cut. But they are nasty!
01-03-2007, 05:41 PM
#6
Member
Thread Starter
Join Date: Aug 2002
Posts: 33
Originally Posted by RX7 13B 4 UR AZZ' post='851405' date='Jan 3 2007, 11:12 AM
i have an lt10s and damn that looks sexy you did the v mount your self? what radiator did you use?
Cheers, I used an aftermarket S5 radiator and altered the angle of the inlet pipe to suit. The support bar which the oil cooler is attached to had to be removed totally, and a new support bar welded in at a different position.
John
