Reactive Racing Makes 768rwhp
Thread Starter
Member
Joined: Nov 2002
Posts: 66
I due take some work. I kinda pic the projects I want to work on. I wouldn't mind doing a couple of single turbo conversions over the winter.
Vosko you are a brave man running 20psi on pump leave that to the professionals
Seriously no need to go that high on pump i have made as much as 470rhp on 13psi its all in turbo selection. If you want to make decent power in a street car on low boost it can be done.
D
Vosko you are a brave man running 20psi on pump leave that to the professionals
Seriously no need to go that high on pump i have made as much as 470rhp on 13psi its all in turbo selection. If you want to make decent power in a street car on low boost it can be done.
D
Super Moderator
Joined: Jul 2001
Posts: 17,839
From: NJ
Originally Posted by rotor_dee' date='Aug 22 2003, 01:40 AM
I due take some work. I kinda pic the projects I want to work on. I wouldn't mind doing a couple of single turbo conversions over the winter.
Vosko you are a brave man running 20psi on pump leave that to the professionals
Seriously no need to go that high on pump i have made as much as 470rhp on 13psi its all in turbo selection. If you want to make decent power in a street car on low boost it can be done.
D
Vosko you are a brave man running 20psi on pump leave that to the professionals
Seriously no need to go that high on pump i have made as much as 470rhp on 13psi its all in turbo selection. If you want to make decent power in a street car on low boost it can be done.
D
it hasn't blown up yet... i was running 15psi which is pretty powerful. that is how i made the 459rwhp.... but i figure 20psi on pump gas should be around 525rwhp!
D, i'll send you a PM
Thread Starter
Member
Joined: Nov 2002
Posts: 66
It is very large and we due run some serious boost to uptain these numbers but with careful tuning and a dependable engine management system like the tec III we are able to get good reliablibilty while still operating on the edge not to use this as a advertisement but if any fellow racers want to build a race car or a project vehicle I will sell duplicate my exact setup to anyone that is interested.
Senior Member
Joined: Jan 2003
Posts: 237
Originally Posted by rotor_dee' date='Aug 21 2003, 08:59 PM
Just got back from the dyno and I am extremely excited. The car made 769rwhp wich is about 90 more rwhp the my previous 682.
This was all accomplished on c116 race fuel turbo only and stock 2mm seals. Check out the dyno sheet. I just want to thank Rus for helping me along the way with the tec3 and my boys erniet and joe for motivating me to get off my *** and get back to the dyno.
Demetrios Karagiannis
This was all accomplished on c116 race fuel turbo only and stock 2mm seals. Check out the dyno sheet. I just want to thank Rus for helping me along the way with the tec3 and my boys erniet and joe for motivating me to get off my *** and get back to the dyno.
Demetrios Karagiannis