Where to get them or do i have to order form Hose teqniques? Seen the ones they have at the parts store but they're **** ass ractive **** ass universal crap https://www.nopistons.com/forums/pub...DIR#>/wink.png

Would prefer black also.......

I bought mine from Hose techniques



Nice silver colour.

Corksport sells it.

Did you do your own job? Cause i just did some reading and everyone says it was the worst task at hand!! on Rob Robinettes site they say its not something to tackle for the light hearted

I did the FC myself, wasn't a hard job at all, of course an FD is a little more involved but it's the same basic principle, I don't see why you couldn't do it yourself.





http://89rag.nopistons.com/gallery/a..._022.sized.jpg

I got tons of red if you want some

The only hard part is getting at them phillip screws. I strip two of them and had to use the good ol' hammer and cold chisel!



Other than that take your TIME! taking those old hard brittle vaccum hose. Mine was like hard plastic and not rubber anymore.



I twist them hoses and spraying some WD-40 before I pull it off. Never broke any nipples on any solenoids. I ended up with the one that canadian tire sells.



let me know if you need help

Yah, the worst part is breaking the nipples off the solenoids.



Removing the emmissions stuff at the same time ensures you have plenty of spares for the turbo control ones. https://www.nopistons.com/forums/pub...IR#>/bigok.gif

Thanx guys! well it looks like ill give it a try then....Colin how much do you want for the silicone you have?

As in removing the air pump completley and not re-installing it?