** Rx Club Of Ontario Dyno Day/meet
06-06-2005, 09:30 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2005
Posts: 3
This is it! The new RX Club of Ontario’s first event!
We will be hosting a Dyno Day/Meet at Autobahn on Sunday, June 12, 2005, from 10am to 6pm.
This is not a tuning event, and there will be no wideband usage as it will slow things down too much. This is just for horsepower and torque printouts.
$40 buys each person 2 pulls. It is expected to go in 20 minute intervals - 20 minutes per person, 3 cars per hour. People can pick their spot (timewise) when they pay. This is a significantly reduced rate, as dyno use can normally run upwards of $100/hour. If you’ve always wondered what kind of power your car is putting down, now is your chance to find out without having to drain your wallet.
This is not a normal business day for the shop; Autobahn is opening just for us, which means we won't be competing with the general public to use the dyno.
To confirm a spot you can either PayPal Lawyer’s Spirit (www.rx7club.com ID) $41 ($1 to cover the PayPal charge) or pay him $40 in person (which can be arranged via Private Message @ www.rx7club.com.) You must include car type, first 3 characters of your license plate and your time preference. You will receive a confirmation PM on this forum.
This is first come, first serve. We will maintain a list of available slots in this thread. Autobahn has promised to service 24 cars and all others will be on a time permitting basis.
Spectators are welcome. This is not just a dyno meet, but also a chance to get together.
WHEN: Sunday, June 12th 10:00am – 6:00pm
WHERE: Autobahn Speed Tuning
181 Woodstream Blvd., Unit 4
Woodbridge, ON., L4L 8G9
DIRECTIONS: Major intersection in Hwy 7/Martingrove Rd.
Go to www.autobahnspeedtuning.ca for directions to the shop
HOW MUCH: $40 for two dyno pulls, first-come, first-serve
PayPal $41 -> charngill@osgoode.yorku.ca
Send a Private Message to Lawyer’s Spirit @ www.rx7club.com to arrange payment drop off of $40 cash.
www.rxclubofontario.com
We will be hosting a Dyno Day/Meet at Autobahn on Sunday, June 12, 2005, from 10am to 6pm.
This is not a tuning event, and there will be no wideband usage as it will slow things down too much. This is just for horsepower and torque printouts.
$40 buys each person 2 pulls. It is expected to go in 20 minute intervals - 20 minutes per person, 3 cars per hour. People can pick their spot (timewise) when they pay. This is a significantly reduced rate, as dyno use can normally run upwards of $100/hour. If you’ve always wondered what kind of power your car is putting down, now is your chance to find out without having to drain your wallet.
This is not a normal business day for the shop; Autobahn is opening just for us, which means we won't be competing with the general public to use the dyno.
To confirm a spot you can either PayPal Lawyer’s Spirit (www.rx7club.com ID) $41 ($1 to cover the PayPal charge) or pay him $40 in person (which can be arranged via Private Message @ www.rx7club.com.) You must include car type, first 3 characters of your license plate and your time preference. You will receive a confirmation PM on this forum.
This is first come, first serve. We will maintain a list of available slots in this thread. Autobahn has promised to service 24 cars and all others will be on a time permitting basis.
Spectators are welcome. This is not just a dyno meet, but also a chance to get together.
WHEN: Sunday, June 12th 10:00am – 6:00pm
WHERE: Autobahn Speed Tuning
181 Woodstream Blvd., Unit 4
Woodbridge, ON., L4L 8G9
DIRECTIONS: Major intersection in Hwy 7/Martingrove Rd.
Go to www.autobahnspeedtuning.ca for directions to the shop
HOW MUCH: $40 for two dyno pulls, first-come, first-serve
PayPal $41 -> charngill@osgoode.yorku.ca
Send a Private Message to Lawyer’s Spirit @ www.rx7club.com to arrange payment drop off of $40 cash.
www.rxclubofontario.com
06-10-2005, 09:58 PM
#3
Junior Member
Thread Starter
Join Date: Jun 2005
Posts: 3
Due to circumstances beyond our control the June 12th, 2005 RX Club Meet and Dyno Day will now be taking place at:
SPLITFIRE PERFOMANCE
220 Rutherford Rd. South
Unit #2
Brampton, ON
L6W 3J6
www.splitfireperformance.com
The orginal location, Autobahn Speed Tuning,has suffered a setback in that there 2 month old 'Mustang Dynometer' is broken. A combination of errors by Mustang Dynometer and UPS has resulted in the machine not being fixed in time for our Dyno Day. Enzo and Mark of Autobahn apologize for any inconvenience and have promised to make it up to the club in the future.
Thanks to a very resourceful and persuasive RX Club Committee we were able to secure the services of Splitfire Performance at ridiculously short notice. Paul Bhawan of Splitfire should be thanked by all members for stepping upto the plate and honouring our deal with Autobahn. If you don't already know Paul owns Canada's fastest import, a turbo charged Honda civic that blazes through the 1/4 mile in 8.66 sec @ 166 mph. We have to respect this piston head for giving our rotaries a chance to shine in his shop.
We apologize for any inconvenience that the location change may cause. We look forward to seeing you all on Sunday.
SPLITFIRE PERFOMANCE
220 Rutherford Rd. South
Unit #2
Brampton, ON
L6W 3J6
www.splitfireperformance.com
The orginal location, Autobahn Speed Tuning,has suffered a setback in that there 2 month old 'Mustang Dynometer' is broken. A combination of errors by Mustang Dynometer and UPS has resulted in the machine not being fixed in time for our Dyno Day. Enzo and Mark of Autobahn apologize for any inconvenience and have promised to make it up to the club in the future.
Thanks to a very resourceful and persuasive RX Club Committee we were able to secure the services of Splitfire Performance at ridiculously short notice. Paul Bhawan of Splitfire should be thanked by all members for stepping upto the plate and honouring our deal with Autobahn. If you don't already know Paul owns Canada's fastest import, a turbo charged Honda civic that blazes through the 1/4 mile in 8.66 sec @ 166 mph. We have to respect this piston head for giving our rotaries a chance to shine in his shop.
We apologize for any inconvenience that the location change may cause. We look forward to seeing you all on Sunday.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)