where to get top fed 550's
05-09-2007, 09:03 PM
#2
Senior Member
Join Date: Jun 2002
Location: La Plata, Maryland
Posts: 9,725
Originally Posted by sen2two' post='871197' date='May 9 2007, 12:48 PM
looking for top fed 550cc injectors that just drop into the primary spot. im using the rails from KG PARTS. thats why i need top feed style injectors.
any links for me???
google.com
05-10-2007, 02:03 PM
#5
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Kissimmee FL.
Posts: 1,579
thought about it...but i already have the rail, fittings, and lines....now i just need to 550's. so the big money has been spent. might as well finish it off....you know.
the problem i have with finding primary injectors is fitting them into the block. do i need some special grommet???
the problem i have with finding primary injectors is fitting them into the block. do i need some special grommet???
05-10-2007, 09:11 PM
#6
Senior Member
Join Date: Jun 2002
Location: La Plata, Maryland
Posts: 9,725
Originally Posted by sen2two' post='871342' date='May 10 2007, 11:03 AM
do i need some special grommet???
No, just the o-ring that comes on them. You can use some fuel line for the insulators around the outside.
05-14-2007, 01:32 PM
#8
Senior Member
Join Date: Mar 2003
Location: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Posts: 2,436
i'd recommend selling the KG primary rail and just mod your stock rail for the -An lines. The top feeds interfer with the ACV stuff too..
05-15-2007, 09:36 AM
#10
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Kissimmee FL.
Posts: 1,579
i have blocked everything off on the manifolds, so there will be no problem fitting them. thanks for all the links.
i already have 4 resistors.
you have any pics of the way to install the primarys with the hose on them to get that tight fit?
i already have 4 resistors.
you have any pics of the way to install the primarys with the hose on them to get that tight fit?