WOW! All I can say is I can't wait to get it broken in!!!



Rob & his crew did an excellent job on this motor, it fired up on the first try and sounds awesome!



Enjoy!



http://flathat.woodstream.net/RX7/Pineappl...eet_Port_IV.WMV (9.5MB)



K



'94 Silver Touring

'01 BMW X5 4.4i (Daily Driver)

----

Pineapple Racing Large StreetPort

Garrett GT35/40 Turbo kit from A-Spec / Jspec Style Custom Intake Filter

PHR 45mm Wastegate w/dump back into Downpipe Custom A-Spec Downpipe

RX7 Store SS MP / Greddy Power Extreme Exhaust / Greddy 2 FMIC

K2RD Secondary Fuel Rail / Bosch 1600cc Secondary Injectors

SX Fuel Pressure Regulator / Autometer Fuel Pressure Gauge

PowerFC w/Commander / Datalogit / OZ DIY Wideband

Unothodox Main Underdrive & Greddy Wtr/Alt Pulleys / Pettit AST

Nippondenso Competition Fuel Pump / HKS Twin Power / Fluidyne Radiator

Hawk Pads / SS Brake Lines / Brembo Slotted & Dimpled Rotors

ACT SS Clutch / RB 9.5lb Flywheel / B&M short shifter

TEIN HA Coilovers / 18x9 SSR Integrals / Toyo Proxy T1-S's 255/35/18

Autometer Boost Gauge / Greddy Turbo Timer / Cusco Strut bars

Blitz SBC-ID Boost Controller / Blitz SBC-ID Power Meter

'99Spec Tail Lights & Rear Spoiler / Efini Badges / HIDS4LESS Stage2

MazdaSpeed Vented Hood / FEED Fresh Air Headlight Intake /

FEED Type II Front Bumper w/99Spec Lights / Wings West Sideskirts

Sounds WICKED!@!!!!!!!!!!



I am very pleased with the work I have had done a Pineapple!

that one nice setup u got there... but looks like there was a lot of black smoke coming out of the exhaust, is that normal? nice idle, can really hear that streetport. :smirk:

It sounds like my dad farting, but thats ok. i would be intimidated by a car that sounded like that

Again Kyle I can say that your ride is badass. I love that nasty sounding exhaust. I gotta see your car in person..

Nocab, I just love your FD. I've seen the Saleen Kill video and was cracking up cuz you lost him so quickly. Anyway, excuse the NEW-B question, but what are you doing to it in this video?

This past week a received a new Large Street Ported engine rebuilt by Pineapple Racing. This video was from the first time I started it. The lope (caused by the street port) is excessive because of the size of the port and the engine not being broken in yet. The amount of lope will probably decrease a bit once the engine breaks in more and the vaccum comes up (during this video it was probably -5). Also the smoke (white & black) are from burning off the coating and lubricants that were used when putting the engine together, about the first 15 - 30 minutes that mostly burns off and it will be "cleaner".



K



PS don't think I'll be able to get that Saleen to race me again if I pull up with my engine lopping like this...he is already scared of me...(actually he listed his car up on ebay for sale the week after I crusified him) hahahah https://www.nopistons.com/forums/pub...#>/biggrin.png

Bwahahahahahahha, oh man. When you killed him, I started to scream like crazy and was sooo hyper. I've never seen an FD kill before so I was excited. My kitten(Daisy) jumped up onto my bed scared as hell.



Thanks for the clarification about the engine, again, AWSOME CAR.

sounds like what id like mine to sound like. mean, yet "quite".

large street port.....i should say so. sounds like a H/C v8 in the video.



are you using the same FMIC that you have the write up on? or did you goto a bigger one, for boost efficiency?



sounds GRRRRREAT.......



keep us posted on the progress.



7sweety, do you have the kill video that you mentioned? i'd love to see it....



louis

My car sounds like that at idle minus the loping, kinda sorta. the ending is so dramatic with the close up of the turbo!

I almost got swallowed by the turbo..nice set up..

Dont be scared to say what you got...I want to know about that turbo...

You can pull the video of me putting the saleen to shame here: http://flathat.woodstream.net/ColumbusRaci...7_vs_Saleen.WMV (12.5M)



Yup, same FMIC. Greddy 2 FMIC for now. Once I start boosting > 20psi consistantly I'll go for the 3 row.



Sorrow - That's the GT35/40 Kit from Aspec.



k

where u from?

Columbus, OH



Sorry, I should update my profile.



K

holy ****!!!!!!!!!!!

looks good !

yeah im in love... i wanna see u race another saleen and beat it even worse with this new setup

Nice

Wow that beast sounds good.

i dont care what anyone says, but i truely like the way a rotary sounds with exhaust.



Hey nocab. the last run in that vid with the Saleen, looks like he was keepin up...did he jump that bad or wut? the 1st 2 runs looked like you tore him a new ass... https://www.nopistons.com/forums/pub...#>/BURNOUT.gif



sweet ride!!

Good video Kyle. Do you know the Mustang owner?

where is the saleen video located? i would like to view it https://www.nopistons.com/forums/pub...#>/biggrin.png

Sounds and looks good bro..



Jason

www.jt-imports.com

3rd race I missed 3rd. :(



Again here is the video URL: http://flathat.woodstream.net/ColumbusRaci...7_vs_Saleen.WMV



Ya, I knew the Saleen owner he was cool... stopped talking **** about imports after the race though...hahaha. Blown 4.6l, at the time he had dyno'd 385rwhp (I forget the torque)



Fun, fun, I hear the guy with the Saleen has done a few more things to his car and is ready for another run... Once I get this motor broken in, look for the rematch kill post! https://www.nopistons.com/forums/pub...#>/biggrin.png



K

Rob @ pineapple is a really good rotorhead and a cool as person. congrats on your car..

I like it.... sounds like a chain saw though. No disrespect intended to such a fine automobile. Salude

i love the sound... SWEEEEET

What mods were performed on the engine other than the street port? Any oil mods? Or strengthening?



Hell does the 13B-REW require any more strengthening?



Nice car Nocab...

I had Pineapple do the stage 3 oil mods (details on their site). Rob said the 13b pushing 600rwhp did not need pinned, so no re-enforcements were made there.



K

Would the pinning have been over kill? The engine sounds beautiful, and if you don't mind my asking how much did you pay for it?

yeah that's what i want to know too... just so i know when to start saving

prices are on the site. http://www.pineappleracing.com https://www.nopistons.com/forums/pub...DIR#>/wink.png

Bro!! man!! I finally saw both clips. It sounds sweet, hopefully mine will be sounding something like that pretty soon. What exhaust do you have? How long did it take for you to get your engine back from Pineapple racing?

I believe he has the JIC Bullet Spartan exhaust.

Well yeah if you want to do it that way... Awhile back I called Pinapple racing to price a new tranny, and Rob told me the prices vary depending on what needed to be fixed. From that one conversation, and everyone's recomendations I wouldn't think twice about buying from him. I just wanted to see how much Nocab's price varied from the base prices...

Damn, I finally got to hear it here at my friends house, cause I don't have speakers at work.. All I can Saw is DDDDAAAAAMMMMMNNNNNN! That is Lovely..

i think he said $4300 i think. i have heard nothing but great things about rob @ pineapple. even my mechanic has talked to him and said he was pretty cool on the phone https://www.nopistons.com/forums/pub...DIR#>/wink.png

Rob is working on my new motor as we speak, I'm getting a mild streetport done to my S5 n/a. And BTW, Rob & Joel are awsome ppl to deal with.

yes, JIC Bullet. Total turn around was about 6 weeks including shipping it cross country to me (week).



I paid $4,300. That was purchase of a rebuildable core from Rob, Large street port, stage3 oil mods and shipping. If you have a core to send him, knock off $900.



K