NoPistons -Mazda Rx7 & Rx8 Rotary Forum
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Twin Turbos (https://www.nopistons.com/3rd-generation-specific-18/twin-turbos-34988/)

Danno 03-04-2004 04:52 PM
Can this be fixed ? Is this a significant problem to have a crack where the waste gate is? Can you put an after market waste gate on? and get rid of the stock acctuator? Pic in next posting.

yonner 03-04-2004 04:53 PM
downsize the pic b4 my head explodes and yes you can use an aftermarket wastegate

Danno 03-04-2004 04:55 PM
1 Attachment(s)
The nasty pic.

Danno 03-04-2004 04:57 PM
Originally Posted by yonner' date='Mar 4 2004, 02:53 PM
downsize the pic b4 my head explodes and yes you can use an aftermarket wastegate
Is that better Yonner? sorry

Danno 03-04-2004 05:13 PM
Aftermarket wastegates are insanely expansive

1Revvin7 03-04-2004 06:54 PM
You could try to weld it...

Fd3BOOST 03-04-2004 07:20 PM
Weld wont hold, Those are shot. Replace them.

Rule of thumb is any crack over 8mm is not repairable.

Yours are past the wastgate flapper and the gasket seat.

94touring 03-04-2004 07:24 PM
Too bad I don't have my stock manifold anymore. I could have sold it to you cheap.

turbovr6 03-04-2004 08:02 PM
yeah that is a BIG crack. I have my stock manifold around here somewhere if you are interested.

Danno 03-04-2004 11:15 PM
how much for the stock manifold


All times are GMT -5. The time now is 03:55 AM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands