TII coils
#11
just post it here man? why make people email it, if you can post it here we can all just look at it. Im taking off my UIM and TB so i can port and remove all emissions and stupid stuff so I want to work on the ignition while i have em off
#12
if you look at the fd ignitor harness that is plugged into it the terminals
go like this (A) brown wire, (B)green/red, ©brown/black, (D)black/white,
(E)green/white, (F)green, (G)green/black, (h) open.........
now the caps letters are the positon in the plug and it helps me just type 1
letter instead of the color.
terminal;
(A) goes to ignition 1 of your computer
(B) goes to trailing coil 1
© goes to ignition 3 of your computer
(D) goes to 12v switched power supply
(E) goes to trailing coil 2
(F) goes to ignition 2 of your computer
(G) goes to both leading coils yes both.
(H) open , do not connect anything here it is unused.
now as far as ignition 1,2,3 goes you may need to figure that out on a power
fc as i do not know how they verb them or even if they use 3 out puts, but
wolf 3d says ing.1 is trailing coil1 , ing2 is leading coils and ing3 is
trailing2.
go like this (A) brown wire, (B)green/red, ©brown/black, (D)black/white,
(E)green/white, (F)green, (G)green/black, (h) open.........
now the caps letters are the positon in the plug and it helps me just type 1
letter instead of the color.
terminal;
(A) goes to ignition 1 of your computer
(B) goes to trailing coil 1
© goes to ignition 3 of your computer
(D) goes to 12v switched power supply
(E) goes to trailing coil 2
(F) goes to ignition 2 of your computer
(G) goes to both leading coils yes both.
(H) open , do not connect anything here it is unused.
now as far as ignition 1,2,3 goes you may need to figure that out on a power
fc as i do not know how they verb them or even if they use 3 out puts, but
wolf 3d says ing.1 is trailing coil1 , ing2 is leading coils and ing3 is
trailing2.
#15
Originally Posted by Dramon_Killer' post='766980' date='Oct 6 2005, 02:31 PM
side note, all FC coil packs are the same.
no they are not, the trailing ignitors on the s5s are not the same as the s4 the differance i do not know i just know that s5 will not work with wolf but s4 does, read up on it and ill look at the s4 n s5 coils i have to see what is differnt. i know its in the electronics of the ignitors.
#16
After using 2 FD coils, 1 aftermarket coil, the conclusion is that the 2nd gen RX7 coils are what you need to use with aftermarket ignition systems like MSD so that they won't short out like the FD or aftermarket coils, I'm currently using MSD on leading with 2nd gen leading coil with no issues after going through nothing but headaches with FD coils and aftermarket coils failing with the MSD.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)