Question about brake conversion (search didnt help)
#3
There is not going to be any fd3s specific brake kit made that will fit a wheel smaller than the stock 16" rim. I think a little more info might help someone get an idea about what you want to accomplish.
#5
Originally Posted by RotaryVillain' post='853237' date='Jan 14 2007, 05:13 PM
may i ask why the hell you would want a smaller rear brake setup and smaller rims?
He is trying to run a set of weld 15x10 (7.5" back spacing) and a MT drag radial 325/50/15. The wheel and tire fits perfect except for the brake caliper sticks out a little too far and hits the inside face of the wheel.
#7
DRAG RACE SETUP! cool! you may want to post this question in the drag racing forum too so the SERIOUS drag racing guys can chime in and you can see what they're running...
i would imagine this would be a completely custom setup though but i guess since your obviously building a serious drag car that some fab work and customization is what you wanna do anyways!
i would imagine this would be a completely custom setup though but i guess since your obviously building a serious drag car that some fab work and customization is what you wanna do anyways!
#8
I'm not 100% but I believe Wilwood sells Ti rotor / caliper for drag racing purpose. I would contact them and see if they have any application for your particular set up...
Or depend on how much material you have, you might be able to machine out some material from the caliper and the wheels to get the stock calipers to fit.
Or depend on how much material you have, you might be able to machine out some material from the caliper and the wheels to get the stock calipers to fit.