NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   PowerFC Help (https://www.nopistons.com/3rd-generation-specific-18/powerfc-help-62819/)

teknics 11-20-2006 05:46 PM

Alright so I'm getting a PFC for a 94 touring.



It comes with the PFC, Commander, and a holder for the commander.



What else should i get for this thing? I was hoping to download maps from online and put them on and tweak them to the car (i have an Innovate LM1 WB). There seems to be so much stuff out for it on the software and hardware side of things so I was hoping to get a "must have list" for it.



Any help?



edit:

Also here is the info on the PFC, is it a good one?



serial number on the actual ecu is:

PFC FD3S4 020-2268



serial number on the box it came in is:

414AZ004



kevin.

amp 11-20-2006 05:56 PM

list mods kev..

dependin on em.. you can get away with the virgin map..

all youd need to do is to reset the pfc to get it back to this stage..

j9fd3s 11-20-2006 06:13 PM

the stock pfc comes with a map thats really close to stock, so it actually runs really well on a stockish* car



*stock turbos, stock ports

herblenny 11-21-2006 08:12 AM

I say get the datalogit as with out it, its pretty limited.

rfreeman27 11-21-2006 10:56 AM

you will need a datalogit to change the maps.



To be honest kev, it would behoove you to get it tuned. Every car runs a little different, and just throwing a map on sometimes works well, sometimes doesent.

SPICcnmGT 11-21-2006 03:44 PM

Depending on your mods the base map should be good for a while. I'm making 305whp using the base map and just tuning the air/fuel, but if you were going to make much more I would say get it tuned. I've also been runing this set up for the past 6month to a year.

teknics 11-21-2006 05:42 PM

mods:



Stage 3 BNR Twins - Non-Seq

Exhaust (dp, mp, cb)

Intake

Upgraded SMIC

Stock Ports

Walbro

Koyo Rad

Alum AST



Sorry for the vagueness, im still not sure what the "exact" parts are, but i know those things (well ill be adding the BNR's and walbro, the rest came with the car)



Yea i plan on getting it professionally tuned but i figure i have a WB so if i get a good map to start off from a car with similar mods i can tune it decent enough to get it to the real tuner.



Kevin.

SPICcnmGT 11-22-2006 08:10 AM

Thats basically my mods minus the Walbro, and as long as you don't lean it out you should be fine. I just adjusted some air/fuel usuing a WB, I haven't messed with timing any and I haven't had any problems. I've also drove the crap out of it 2-3 track days like this, so if someone tells you that you can't run the base map witout getting it tuned or you will blow your engine, they are crazy.

teknics 11-22-2006 05:29 PM

well thats good news, so basically get a datalogit and put the base maps onto the PFC and go with that?



great, now if the base maps arent on there what do i have to do to get them? Amp mentioned resetting the PFC to get the virgin maps, is it that simple?



kevin.

herblenny 11-24-2006 12:49 AM

Kevin,



Get in touch with Chuck (cewrx7r1 on RX7club). He wrote a tuning pack it that you could read to clearify about tuning via PFC($30). I think its worth it to buy it and read it.



It will answer most of what your asking plus help you get your hand wet.


All times are GMT -5. The time now is 11:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands