|
You would not have to sit in the engine if you remove the rack to do the job. https://www.nopistons.com/forums/pub...R#>/tongue.png That's funny. Thats the first time I ever seen that.
|
the rack is a PITA to remove, those friggin phillips head screws are in there good.
|
[quote name='willjs7' date='May 16 2005, 04:53 AM']the rack is a PITA to remove, those friggin phillips head screws are in there good.
[snapback]713535[/snapback] [/quote] Agreed they are tight, but they do come off and it does make the job alot easier when you can do it on a bench. Either way. |
i finished it last night, I'm just awaiting sensors (i broke the nipple off a few). and new viton check valves. then i will put it back together https://www.nopistons.com/forums/pub...IR#>/smile.png
|
[quote name='willjs7' date='May 16 2005, 09:14 AM']i finished it last night, I'm just awaiting sensors (i broke the nipple off a few). and new viton check valves. then i will put it back together https://www.nopistons.com/forums/pub...IR#>/smile.png
[snapback]713633[/snapback] [/quote] Yea that happens when you don't slice and twist them off. |
stick something like tape or papertowels over those LIM holes before you drop something down into them and shitcan an engine.
other than that, ya shoulda removed the whole rack... |
opps... just looked farther down in the series of pics, already covered them. If you need any additional solenoids, PM me. I have a ton of them.
|
Ummm wow, that has to be the first i have seen it done like that also lol. Your last pic, so you know. there is a line thats kinked pretty bad, hope you saw it.
By not removing the rats nest you have left out about 4 more hoses if i remember correct. Hope you did all the ones (not done in the pix) down by the TCA also. |
got that kinked hose
|
Yeah, you'll definitely need to replace that hose going to the top of the air control valve with a longer hose. Not only is it currently kinked, but it has to run over to the side of the ACV so the intake manifold can sit in place properly. Look at how the stock hose was run and duplicate that.
Dale |
i seen that already, thanks for catching it though , new pics soon, GTC hooked me up with some selinoids
|
All times are GMT -5. The time now is 09:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands