NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Overrevving After Boost Gauge Installed... (https://www.nopistons.com/3rd-generation-specific-18/overrevving-after-boost-gauge-installed-51136/)

MugenCho 07-20-2005 05:44 PM

So I finally got my boost gauge installed and now when i turn my car on it shoots up to 3500RPM and will keep rising. Great thing is I dropped the nipple cover thing when I took it off so I can plug that back into see if it'll run right. Anyone know why this happens?

Signal 2 07-20-2005 05:57 PM

[quote name='MugenCho' date='Jul 20 2005, 05:44 PM']So I finally got my boost gauge installed and now when i turn my car on it shoots up to 3500RPM and will keep rising. Great thing is I dropped the nipple cover thing when I took it off so I can plug that back into see if it'll run right. Anyone know why this happens?

[snapback]740743[/snapback]

[/quote]



I think your talking about the "Accelerated Warm-Up System" (AWS). On a cold start, it's suppose to do that but it's hard as hell on your engine. The easiest way to disable that is to start the car in gear. If your car is warm it shouldn't do that.

rx7girltk 07-20-2005 05:59 PM

yea my car does that when you start it it shoots up to 2000-2500rpms then back down to idle

MugenCho 07-20-2005 05:59 PM

Well It's well over 100 degrees out here and I was driving a few hours ago. It's never done this before. Usually it'll sit a lil over 3k and then go down but now it just keeps going up and if I rev it'll stay at the RPM I revved to...

amp 07-21-2005 07:53 AM

make sure your throttle cable isnt stickin...

DUB 07-21-2005 08:11 AM

^2nd that

FikseRxSeven 07-21-2005 09:02 AM

where did you install the hose for the gauge? id you happen to take off the manifold?



just a few weeks ago, i took my upper intake manifold off, and forgot to tighten all the screws ... the car shot up to 4000rpm as soon as i turned the key. the car also made a wicked sounding wistle sound

MugenCho 07-21-2005 05:59 PM

Yeah it turned out to be just the throttle cable sticking. I musta pushed it down a lil when i was reaching for the hose and pushed it out of place. Just had to unhooke it from what it was hooked on.


All times are GMT -5. The time now is 01:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands