ok...so I re-did my intercooler piping...
#4
Originally Posted by amp' post='863277' date='Mar 12 2007, 07:07 PM
looks like itll interfere with your oil cooler(s)....
Yea I didnt take notice of that but it does seem like the piping will interfere with the oil cooler. The pipeing does look great though.
#8
Originally Posted by sen2two' post='863308' date='Mar 13 2007, 08:58 AM
..and the oil cooler will not be in the stock location...
and worse.. youll be blocking the air flow to the cooler...
heres an old pic for comparison..
#9
im gonna be using an aftermarket oilcooler that comes with a fan on it.
the oil cooler size is about 8" by 12"....about the same size as a magazine.
i already fitted a place for it on the driver side a little farther back than stock placement. and with the fan on it. i dont need any ducting...
i originally was going to putan FC3S cooler in between the intercooler and radiator. but i have enough room on the side to fit the smaller one. so its going there...
the oil cooler size is about 8" by 12"....about the same size as a magazine.
i already fitted a place for it on the driver side a little farther back than stock placement. and with the fan on it. i dont need any ducting...
i originally was going to putan FC3S cooler in between the intercooler and radiator. but i have enough room on the side to fit the smaller one. so its going there...