NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Oil Leak At Trans/motor Seal (https://www.nopistons.com/3rd-generation-specific-18/oil-leak-trans-motor-seal-44604/)

supertpr25 02-10-2005 09:03 AM

For no apparent reason I see an oil leak in the area where my transmission meets the motor. I am not sure if this is a job for a specialty shop, just the dealer, or maybe even a transmission shop. I do not have means to work under my car so if anyone has had this problem I would love a suggestion or two.



I have about 2000 miles on a new motor, could the install of this caused a problem?



No other pproblems since everything was replaced in early 2003 at PFS

AgentSpeed 02-10-2005 09:29 AM

If it's between the motor and tranny then it sounds like it's the rear main seal. To replace you have to drop the tranny. It is oil and not gear oil from the tranny correct? Either way you'd have to drop the tranny to fix the seal.

GreyGT-C 02-10-2005 11:36 AM

*IF* you can find somewhere that you can work under the car...it's an afternoon/weekend job. Good time to replace your engine and tranny oil while you're at it.

Fe3Boost 02-10-2005 11:42 AM

This car is an auto! It was a mana motor when it was installed. Andy I sent you a pm. Maybe this weekend we can put it on my lift and take a look.

j9fd3s 02-10-2005 06:47 PM


Originally Posted by Dont_Be_A_Rikki' date='Feb 10 2005, 09:42 AM
This car is an auto! It was a mana motor when it was installed. Andy I sent you a pm. Maybe this weekend we can put it on my lift and take a look.




mazda doesnt always change the stat gear o rings, i dont think they take the gears off. https://www.nopistons.com/forums/pub...DIR#>/wink.png

supertpr25 02-12-2005 09:56 AM

thanks

ApneaBlue 02-12-2005 11:14 AM


Originally Posted by supertpr25' date='Feb 12 2005, 07:56 AM



The only good thing about this whole thing is that the seal you need is only 20 something bucks...A couple years ago I had RP replace mine and parts were something like 22.

Booztd 3 07-21-2005 02:48 PM

Any updates on this or anyone have any feedback?


All times are GMT -5. The time now is 08:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands