Loi's Goofy Look'n Fd
04-03-2003, 11:35 PM
#51
Senior Member
Join Date: Nov 2001
Location: Bayarea, CA
Posts: 1,009
I have added the group buy page on my website.
http://www.rotaryextreme.com/cfsides.html
Now I am going to post it at the group buy section as well.
Chuck
http://www.rotaryextreme.com/cfsides.html
Now I am going to post it at the group buy section as well.
Chuck
04-04-2003, 02:05 PM
#52
Member
Join Date: Jan 2002
Posts: 35
Originally Posted by GarageBoy' date='Apr 3 2003, 04:30 PM
Good luck with the A-Seals! Another question: why do you need the boost controller if the Power FC can do the same job?
04-05-2003, 05:25 AM
#54
Senior Member
Join Date: May 2002
Location: Okinawa, Japan
Posts: 4,928
Originally Posted by Qball' date='Apr 5 2003, 05:05 AM
the PFC can only control boost using the stock solenoids for the stock twin setup. the single set up he has plus the external wastegate requires a stand alone boost controller to make it work.
The stock boost controller solenoid must be taken out and an AVC-R Solenoid must be put in it's place(they have the same connector). And of course, if you want to boost higher than 1.2, you need to get a GM 3 Bar map sensor(appx. $150). You can buy the just the solenoid for about ~$120...I went to our local car shop and ordered one from apexi Japan.
04-06-2003, 01:11 AM
#57
Senior Member
Join Date: May 2002
Location: Okinawa, Japan
Posts: 4,928
Originally Posted by GarageBoy' date='Apr 6 2003, 08:57 AM
So the PFC can handle high boost levels with the Apexi solenoid?
