went to the shop. finished installing diff brace, finished installing line lock.... tested line lock https://www.nopistons.com/forums/pub...IR#>/smile.png
here are some new pix http://www.vosko.net/photos/fd/linelock/DSCF0009.JPG http://www.vosko.net/photos/fd/linelock/DSCF0010.JPG http://www.vosko.net/photos/fd/linelock/DSCF0011.JPG http://www.vosko.net/photos/fd/linelock/DSCF0012.JPG vid coming soon https://www.nopistons.com/forums/pub...#>/biggrin.png |
So much more room with the ABS gone! So when you buying new tires?
|
https://www.nopistons.com/forums/pub...#>/biggrin.png damn nice i what those big brake booster. how much hehe?
|
|
Looks good! Now go kick some ass!
|
its a feed big brake master about $381
|
|
that line lock rules!
mike |
I will post a complete write up on how to do this later tonight
|
I plan on getting an R1 bar sometime soon..
|
Just did a search and didn't come up with anything.. so...
What's linelock? |
mmmm.... smoky! https://www.nopistons.com/forums/pub...IR#>/bigok.gif
|
Originally Posted by kkw4p' date='Jun 12 2003, 02:04 PM
Just did a search and didn't come up with anything.. so...
What's linelock? |
linelock/ABS removal instructions here:
https://www.nopistons.com/forums/index.php?...ST&f=66&t=20181 |
Why do you need the Feed master cylinder? Can you put in a line lock and keep abs?
|
Originally Posted by Silver Ninety Three' date='Jun 12 2003, 06:00 PM
Why do you need the Feed master cylinder? Can you put in a line lock and keep abs?
|
Originally Posted by Silver Ninety Three' date='Jun 12 2003, 07:00 PM
Why do you need the Feed master cylinder? Can you put in a line lock and keep abs?
|
Originally Posted by vosko' date='Jun 12 2003, 06:45 PM
because i wanted it https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Originally Posted by turbovr6' date='Jun 12 2003, 08:01 PM
yeah!! don't you know vosko's pants catch fire if money is in there too long https://www.nopistons.com/forums/pub...IR#>/boink.gif
|
****** SWEET!
|
I hate to see your tire bills! That car that rolled past seemed afraid of you!
|
Originally Posted by GarageBoy' date='Jun 12 2003, 09:30 PM
I hate to see your tire bills! That car that rolled past seemed afraid of you!
|
you guys need to mark the street off at a 1/4 mile
mike |
its not a 1/4 mile long and its a hill https://www.nopistons.com/forums/pub...1047683785.gif
|
Originally Posted by kkw4p' date='Jun 12 2003, 02:04 PM
Just did a search and didn't come up with anything.. so...
What's linelock? |
|
that's cool, never heard of that before..
|
I was undecided about getting a line lock. But after that vid it's a must have. Just need to finish the other projects.
|
NICE! I just ordered the Line Lock from Summit racing. I noticed there are 2 lines for the front brakes and one for the rear. Does this mean you need 2 solenoids, one for each front brake line?
A write up on the line lock install would be gold! https://www.nopistons.com/forums/pub...IR#>/boink.gif |
Originally Posted by Leprechaun' date='Jun 12 2003, 11:50 PM
NICE! I just ordered the Line Lock from Summit racing. I noticed there are 2 lines for the front brakes and one for the rear. Does this mean you need 2 solenoids, one for each front brake line?
A write up on the line lock install would be gold! https://www.nopistons.com/forums/pub...IR#>/boink.gif |
fkn sweet! i been wanting to put line lock on my car for a while... https://www.nopistons.com/forums/pub...#>/biggrin.png what brake set up do you have vosko?
|
brembro cross drilled and slotted fronts and axxis pads up front and stock brakes in the back
|
Originally Posted by Leprechaun' date='Jun 12 2003, 10:50 PM
NICE! I just ordered the Line Lock from Summit racing. I noticed there are 2 lines for the front brakes and one for the rear. Does this mean you need 2 solenoids, one for each front brake line?
A write up on the line lock install would be gold! https://www.nopistons.com/forums/pub...IR#>/boink.gif Check it out! https://www.nopistons.com/forums/pub...IR#>/bigok.gif |
Damn, I need one of those!!!!! How much would it cost to do the line lock setup with the abs still there? Are you doing those burnouts in 1st or 2nd???
Also, have you noticed much change without the abs??? how easy do the tires lock up? STEPHEN |
Originally Posted by SPOautos' date='Jun 13 2003, 11:17 AM
Damn, I need one of those!!!!! How much would it cost to do the line lock setup with the abs still there? Are you doing those burnouts in 1st or 2nd???
Also, have you noticed much change without the abs??? how easy do the tires lock up? STEPHEN lets see about $100-$120 for all the line lock stuff. $50 wilwood brake balancer. about $50 in brake lines and fittings and many hours trying to make it all work. honestly i don't miss the ABS at all. the car stops faster. i still have to play with the brake balancer BUT after the ABS was removed i couldn't get the front tires to lock up it would just push the car forward! then ito said ok we are finishing the line lock install lol anyway... i think its also a bit harder for me since judge ito tuned my timing map needless to say lots more power now https://www.nopistons.com/forums/pub...#>/biggrin.png |
I noticed that your car still pulls to one side w/ the line lock... does this always happen? I was goin to get one but thought the car would just be at a stand still while initiating the burn out... https://www.nopistons.com/forums/pub...IR#>/blush.png
|
the road is uneven and its on a hill. that doesn't help ..... on a flat surface it will work like normal https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Thanks for the descriptions of line lock. I've seen that before, but as a toggle switch on the dash. Either way... f'ing cool.
Thanks -Kevin |
I was talking about the car that passed by in the vid
|
Originally Posted by GarageBoy' date='Jun 13 2003, 09:05 PM
I was talking about the car that passed by in the vid
|
All times are GMT -5. The time now is 12:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands